JVC HR-E539EE, HR-E639EE instruction manual Tape-To-Tape Editing, Playback equipment, Dubbed tape

Page 25

EN25

Playback

This recorder can play back all 3 types of recorded tape.

Recorded tape

PAL

MESECAM

NTSC

Manual switching

HR-E639EE/HR-E539EE

Playback circuit

PAL

MESECAM

NTSC[PAL

NTSC 3.58 MHz

Manual switching

NTSC 4.43 MHz

Built-in

RFconverter

G, K

	Multi-system receiver
	PAL
RF OUT	(B/G, D/K)
RF OUT
	Multi-system monitor
	PAL
VIDEO OUT	SECAM
VIDEO OUT	NTSC 3.58
AUDIO OUT	NTSC 4.43

NOTES:

When viewing NTSC tapes on a PAL TV set:

●The picture may shrink vertically with black bars appearing at the top and bottom of the screen. This is not a malfunction on the part of the video recorder nor the TV.

●The picture may roll up or down. This can be corrected using the V-HOLD control found on some TVs. (This cannot be corrected if the TV does not have a V-HOLD control.)

●During search, still, or frame-by-frame playback, the picture will be distorted, and there may be a loss of colour.

ATTENTION:

When this recorder is connected to a multi-system TV, the audio signal may not be heard or may be noisy if the colour system select switch of the TV is adjusted to the AUTO position. In such a case, change the setting of the colour system select switch of the TV to the position which corresponds to the setting (G or K) of the RF converter system select switch on the rear panel of the recorder.

Tape-To-Tape Editing

There are 4 different types of recorded tape, depending on the signal recorded.

Recorded tape	Playback equipment	HR-E639EE/HR-E539EE

Dubbed tape

PAL

MESECAM

SECAM

NTSC

PAL

MESECAM

SECAM

NTSC 3.58 MHz

PAL

MESECAM

Recording circuit

NTSC 3.58 MHz

PAL

MESECAM

NTSC

NTSC 4.43 MHz

NTSC 4.43 MHz

Image 25

Contents HR-E639EE Hi-Fi Contents Safety PrecautionsBasic Connections Check ContentsSituate Recorder Connect Recorder to MainsTune The TV To Your Video Recorder Select Televi- sion SystemOn-Screen Displays ENABLE/DISABLESelect Language ScreenMode Select Screen Access Channel SETEN Initial Settings Tuner SetSelect Position Select ModeStore Channel Select ChannelInitial Settings Perform TuningFine-Tuning Channels Already Stored SET Time Clock SetSET Date SET YearLoad a Cassette Basic PlaybackPoint Start PlaybackPause During Playback Playback FeaturesActivate HIGH-SPEED Search Override Automatic Tracking Adjust TrackingManually Return to AutomaticActivate Repeat Activate Instant ReviewPlayback Activate Index SearchStop Scene Finder Activate Scene FinderScene Finder Next Function MemoryTape Position Indicator Remote A/B Code SwitchingRental Return E639EE only Soundtrack Selection E639EE onlyBasic Recording Recording Features S.T. Picture System Access Mode SelectEN Recording RecordingAuse PlaybackProgramming TimerStart Time Enter Programme Stop TimeTimer Timer ModeEngage RECORDER’S Select ProgrammeEdit To Or From Another Video Recorder Input ModeMake Connections EditingSET RECORDER’S Input Edit From a CamcorderMode Start CamcorderOff-Air Recording Setting Of The Colour System Select ButtonsHR-E639EE/HR-E539EE Playback equipment Tape-To-Tape EditingDubbed tape Control Your TV Using Addi- tional Buttons Multi-Brand Remote ControlSET TV Brand Code TRY Operating TVClear Playback picture has a loss Corrective ActionOn Next Roubleshooting Timer againCheck the programmed data and re Playback Recording Quest Ions and AnswersHR-E539EE has only one Audio input connector Open the lid to access covered connectors and buttonsEN Index Available with HR-E639EE only HR-E539EE has only one Audio output connectorHow To Use Installing BatteriesIndex Speci Fications EN PrecautionsDo not place the recorder Do not block the recorder’s ventilation openingsHR-E639/539EE