Magnavox VRZ223AT owner manual Hookups With a Stereo TV

Page 10

VRZ223(H1690).QX33 4/9/99 9:09 AM Page 10

10 Hookups With a Stereo TV

			ANT
			IN
AUDIO
OUT	IN		OUT
VIDEO		CH3	CH4
VIDEO

VIDEO (yellow) and	2
AUDIO (white) OUT Jacks

1 antenna or cable to

ANT(enna)

IN Jack

Video Cable

Audio and Video IN Jacks on TV

3 Audio Cable

●Audio and Video cables are not supplied.

1

Connect the antenna or cable to the ANT(enna) IN Jack on the back of the VCR.

2

Connect a video cable to the yellow VIDEO OUT Jack on the back of the VCR. Then, connect the other end of the video cable to the VIDEO IN Jack on your TV.

3

Connect an audio cable to the white AUDIO OUT Jack on the back of the VCR. Then, connect the other end of the audio cable to the AUDIO IN Jack on your TV.

(If your TV has Right and Left AUDIO IN Jacks, you must use a “Y” splitter audio cable as illustrated to deliver audio to the TV’s right and left channels.)

4

Turn on your TV, making sure it is in Line Input mode. Please refer to your TV owner’s manual for details.

Helpful Hint

•This hookup will not give you stereo sound. To get stereo sound, use the connections on pages six - seven and select the channel to be viewed at the TV (with the VCR turned off).

Image 10

Contents VRZ223AT Dear Philips Magnavox product owner For Customer UseSafety Precautions FeaturesIntroduction Table of Contents Before Using Your VCR Hookups Without a Cable Box / Direct Broadcast System Disconnect the antenna or cable from your TV Plug in the TV and the VCR ANT Audio OUTConnections Hookups With a Cable Box / Direct Broadcast SystemRecording/Viewing Any Channel Hookups With a Cable Box / Direct Broadcast System cont’d Recording One Channel/Watching AnotherHookups With a Stereo TV Turning on Your VCR 2Turn on the TVAutomatic Channel Setup Press the VCR button Press the Menu buttonAutomatic Channel Setup cont’d Reviewing Memorized Channels Press the STATUS/EXIT button once or twice to exit613-4 Daylight-Saving Time Language Selection Remote Control Buttons VCR ButtonEject Button Volume o/p ButtonsTV Button If you select Status ON, then select Counter only on On-Screen Status DisplaysStatus Display example only If you select Status ON, then select Counter only OFFVCR Display Panel Front Panel Rear Panel Playing 1Turn on the TV 2Insert a tape in the VCRTurn on the TV and set it to channel 3 or 4, whichever RecordingVCR light does not appear, press the VCR/TV button once Recording One Channel/Watching Another One-Touch Recording Timer Recording DailyTimer Recording cont’d Instructions continue onPress the STATUS/EXIT button. Program WAS COM Tape SpeedsPROGRAM, then press the F.FWD/B button Checking or Cancelling Timer RecordingsPress the PLAY/o button or the STOP/p button to select Program REVIEW, then press the F.FWD/B buttonSetting Up the VCR Plus+ Programming System ChannelsSetting Up the VCR Plus+ Programming System cont’d Timer Recording With the VCR Plus+ Programming System Timer Recording With the VCR Plus+ Programming System cont’d Rerecording Tape Duplication AntennaRepeat Play Press the F.FWD/B button so that on appears besideReal-Time Counter Memory Super High Speed Searching LP/SLP Special Effects PlaybackForward and Reverse Searching SP/LP/SLP Viewing a Still PictureAutomatic Operation Features Glossary Cable Box/DBS Output Channel 03 orHelpful Hints Helpful Hints cont’d Specifications Limited Warranty Video Cassette RecorderIndex AutomaticVRZ223H1690.QX33 4/9/99 910 AM Supplied Accessories