Magnavox VRZ223AT owner manual Recording, Turn on the TV and set it to channel 3 or 4, whichever

VRZ223(H1690).QX33 4/9/99 9:09 AM Page 25

Read and follow the steps below to record a television program.

1

Turn on the TV and set it to channel 3 or 4, whichever the

CH3/CH4 switch on the back of the VCR is set to.

2

Insert a tape with its record tab intact in the VCR.

3

Press the VCR button.

4

If the VCR light appears on the display panel, go to step 5. If the

VCR light does not appear, press the VCR/TV button once.

5

Press the SPEED button until the desired tape speed appears briefly on-screen. (Details about tape speed are on page 30.)

6

Use the CHANNEL o/p buttons or the Number buttons to select the channel to be recorded.

7

Press the REC(ord)/OTR button once to start recording. The REC light will appear.

8

To pause the recording, press the PAUSE/STILL button once. The REC light will flash. To resume recording, press the REC(ord)/OTR button or press the PAUSE/STILL button again. The REC light will come on again.

9

To stop recording, press the STOP/p button.

Recording 25

1Turn on the TV.

2Insert a tape in the VCR.

3

	POWER	VCR	TV	EJECT	4
	1	2	3	VCR/TV
	4	5	6
	7	8	9	CHANNEL	6
5	VCR PLUS+	0	+100
	SPEED	VOLUME		MUTE
	MENU	STATUS/EXIT	CLEAR	MEMORY	8
7	REWIND	/PLAY		F.FWD
	REC/OTR	/STOP		PAUSE/STILL

9

Helpful Hints

•If you press the REC(ord)/OTR but- ton when there is not a tape in the VCR, NO CASSETTE will flash on- screen.

•If you press the REC(ord)/OTR but- ton while a tape without a record tab is in the VCR, the VCR will eject the tape and PROTECTED CAS- SETTE CANNOT RECORD will flash on-screen.

•Other recording options are on pages 26 - 36.

•You can change the tape speed during a recording, but some distor- tion will appear on the tape.

•The VCR will record in a preset vol- ume.