Magnavox VRZ223AT owner manual Specifications

Page 44

VRZ223(H1690).QX33 4/9/99 9:10 AM Page 44

44 Specifications

Video Heads

Two heads

Video Signal

EIA standards; NTSC color

Antenna

VHF/UHF – 75 ohm external antenna terminal

VHF Output Signal

Channel 03 or 04 (switchable) 75 ohms unbalanced

Power Requirement

120V AC; 60Hz

Power Consumption

16W

Operating Temperature

41°F (5°C) to 104°F (40°C)

Relative Humidity

10% to 80%

Weight

5.51 lbs. (2.5 kg.)

Dimensions

14-3/16” (W) x 3-1/16” (H) x 10” (D) (360 mm x 92mm x 230mm)

Tuner Broadcast Channels

VHF 2-13, UHF 14-69

Cable TV Channels

2 – 13 Midband: A – 1 Superband: J – W Hyperband: A-5 – A-1 Special Channel: 5A Ultraband: 37 – 94, 100 – 125

NOTE: Designs and specifications are subject to change without notice.

Image 44

Contents VRZ223AT Dear Philips Magnavox product owner For Customer UseIntroduction FeaturesSafety Precautions Table of Contents Before Using Your VCR Hookups Without a Cable Box / Direct Broadcast System Disconnect the antenna or cable from your TVPlug in the TV and the VCR ANT Audio OUTRecording/Viewing Any Channel Hookups With a Cable Box / Direct Broadcast SystemConnections Hookups With a Cable Box / Direct Broadcast System cont’d Recording One Channel/Watching AnotherHookups With a Stereo TV Turning on Your VCR 2Turn on the TVAutomatic Channel Setup Press the VCR button Press the Menu buttonAutomatic Channel Setup cont’d Reviewing Memorized Channels Press the STATUS/EXIT button once or twice to exit613-4 Daylight-Saving Time Language Selection Remote Control Buttons VCR ButtonTV Button Volume o/p ButtonsEject Button On-Screen Status Displays Status Display example onlyIf you select Status ON, then select Counter only on If you select Status ON, then select Counter only OFFVCR Display Panel Front Panel Rear Panel Playing 1Turn on the TV 2Insert a tape in the VCRVCR light does not appear, press the VCR/TV button once RecordingTurn on the TV and set it to channel 3 or 4, whichever Recording One Channel/Watching Another One-Touch Recording Timer Recording DailyTimer Recording cont’d Instructions continue onPress the STATUS/EXIT button. Program WAS COM Tape SpeedsChecking or Cancelling Timer Recordings Press the PLAY/o button or the STOP/p button to selectPROGRAM, then press the F.FWD/B button Program REVIEW, then press the F.FWD/B buttonSetting Up the VCR Plus+ Programming System ChannelsSetting Up the VCR Plus+ Programming System cont’d Timer Recording With the VCR Plus+ Programming System Timer Recording With the VCR Plus+ Programming System cont’d Rerecording Tape Duplication AntennaRepeat Play Press the F.FWD/B button so that on appears besideReal-Time Counter Memory Special Effects Playback Forward and Reverse Searching SP/LP/SLPSuper High Speed Searching LP/SLP Viewing a Still PictureAutomatic Operation Features Glossary Cable Box/DBS Output Channel 03 orHelpful Hints Helpful Hints cont’d Specifications Limited Warranty Video Cassette RecorderIndex AutomaticVRZ223H1690.QX33 4/9/99 910 AM Supplied Accessories