Magnavox VRZ223AT owner manual Recording One Channel/Watching Another

Page 26

VRZ223(H1690).QX33 4/9/99 9:09 AM Page 26

26 Recording One Channel/Watching Another

1

Press the VCR button.

2

Start a recording. (See page 25.)

3

Press the VCR/TV button to put the VCR in TV position. The VCR light will disappear from the VCR’s display panel.

4

Use the TV remote control to select the channel you want to watch at the TV.

5

To return to the channel being recorded, use the TV remote control to select channel 03 or 04 at the TV

(whichever channel the CH3/CH4 switch on the back of the VCR is set to).

6

Press the VCR button.

7

Press the VCR/TV button to put the VCR in VCR posi- tion. The VCR light will appear on the display panel. The channel being recorded will appear on-screen.

8

Press the STOP/p button to stop the recording.

1&6

3&7

POWER	VCR		TV	EJECT
1	2		3	VCR/TV
4	5		6
7	8		9	CHANNEL
7	8		9
VCR PLUS+	0	+100
SPEED	VOLUME			MUTE
MENU	STATUS/EXIT	CLEAR		MEMORY
REWIND	/PLAY			F.FWD
2 REC/OTR	/STOP			PAUSE/STILL
				8

Select the channel you want to

4 watch at the TV.

5 Select channel 03 or 04 at the TV.

Helpful Hints

•If you use a Cable Box or Direct Broadcast System hookup, you may not be able to watch one channel while recording another. See pages eight-nine for details.

Image 26

Contents VRZ223AT Dear Philips Magnavox product owner For Customer UseIntroduction FeaturesSafety Precautions Table of Contents Before Using Your VCR Hookups Without a Cable Box / Direct Broadcast System Disconnect the antenna or cable from your TVPlug in the TV and the VCR ANT Audio OUTRecording/Viewing Any Channel Hookups With a Cable Box / Direct Broadcast SystemConnections Hookups With a Cable Box / Direct Broadcast System cont’d Recording One Channel/Watching AnotherHookups With a Stereo TV Turning on Your VCR 2Turn on the TVAutomatic Channel Setup Press the VCR button Press the Menu buttonAutomatic Channel Setup cont’d Reviewing Memorized Channels Press the STATUS/EXIT button once or twice to exit613-4 Daylight-Saving Time Language Selection Remote Control Buttons VCR ButtonTV Button Volume o/p ButtonsEject Button If you select Status ON, then select Counter only on On-Screen Status DisplaysStatus Display example only If you select Status ON, then select Counter only OFFVCR Display Panel Front Panel Rear Panel Playing 1Turn on the TV 2Insert a tape in the VCRVCR light does not appear, press the VCR/TV button once RecordingTurn on the TV and set it to channel 3 or 4, whichever Recording One Channel/Watching Another One-Touch Recording Timer Recording DailyTimer Recording cont’d Instructions continue onPress the STATUS/EXIT button. Program WAS COM Tape SpeedsPROGRAM, then press the F.FWD/B button Checking or Cancelling Timer RecordingsPress the PLAY/o button or the STOP/p button to select Program REVIEW, then press the F.FWD/B buttonSetting Up the VCR Plus+ Programming System ChannelsSetting Up the VCR Plus+ Programming System cont’d Timer Recording With the VCR Plus+ Programming System Timer Recording With the VCR Plus+ Programming System cont’d Rerecording Tape Duplication AntennaRepeat Play Press the F.FWD/B button so that on appears besideReal-Time Counter Memory Super High Speed Searching LP/SLP Special Effects PlaybackForward and Reverse Searching SP/LP/SLP Viewing a Still PictureAutomatic Operation Features Glossary Cable Box/DBS Output Channel 03 orHelpful Hints Helpful Hints cont’d Specifications Limited Warranty Video Cassette RecorderIndex AutomaticVRZ223H1690.QX33 4/9/99 910 AM Supplied Accessories