Magnavox VRZ223AT owner manual Hookups With a Cable Box / Direct Broadcast System cont’d

Page 9

VRZ223(H1690).QX33 4/9/99 9:09 AM Page 9

Hookups With a Cable Box / Direct Broadcast System (cont’d) 9

With this connection:

You may watch one channel while recording another.

You may not record scrambled channels.

1 VCR

ANT

IN

OUT

IN

OUT

VIDEO CH3 CH4

Cable

Signal

Cable Box/DBS

2

 

75V

 

 

ANT

/

 

 

CABLE

 

IN

 

 

 

OUT

 

 

 

RF coaxial

 

 

 

cable

 

 

RF coaxial

3

TV’s ANTENNA

 

IN Jack

cable

 

Connections

1

Connect a Cable signal to the VCR’s ANT(enna) IN Jack.

2

Use an RF coaxial cable (supplied) to connect the OUT Jack on the VCR to the IN Jack on the Cable Box/DBS.

3

Use a second RF coaxial cable to connect the OUT Jack on the Cable Box/DBS to the ANTENNA IN Jack on the TV.

Recording One Channel/Watching Another

1

Put the Cable Box/DBS on the same channel as the VCR’s CH3/CH4 switch. Then, with the VCR in VCR position (the VCR light will appear on the display panel), use the CHANNEL o/p buttons to select the channel you want to record at the VCR. Start the recording.

2

Press the VCR/TV button once to put the VCR in TV position. (The VCR light will disappear.)

3

Set the TV to the Cable Box/DBS output channel (03 or 04).

4

Select the channel you want to watch at the Cable Box/DBS.

Helpful Hint

When you play a tape, make sure the Cable Box/DBS is set to the same channel as the CH3/CH4 switch on the VCR. Set the TV to the Cable Box/DBS output channel (03 or 04).

Image 9
Contents VRZ223AT For Customer Use Dear Philips Magnavox product ownerFeatures Safety PrecautionsIntroduction Table of Contents Before Using Your VCR Disconnect the antenna or cable from your TV Hookups Without a Cable Box / Direct Broadcast SystemANT Audio OUT Plug in the TV and the VCRHookups With a Cable Box / Direct Broadcast System ConnectionsRecording/Viewing Any Channel Recording One Channel/Watching Another Hookups With a Cable Box / Direct Broadcast System cont’dHookups With a Stereo TV 2Turn on the TV Turning on Your VCRPress the VCR button Press the Menu button Automatic Channel SetupAutomatic Channel Setup cont’d Press the STATUS/EXIT button once or twice to exit Reviewing Memorized Channels613-4 Daylight-Saving Time Language Selection VCR Button Remote Control ButtonsVolume o/p Buttons Eject ButtonTV Button Status Display example only On-Screen Status DisplaysIf you select Status ON, then select Counter only on If you select Status ON, then select Counter only OFFVCR Display Panel Front Panel Rear Panel 1Turn on the TV 2Insert a tape in the VCR PlayingRecording Turn on the TV and set it to channel 3 or 4, whicheverVCR light does not appear, press the VCR/TV button once Recording One Channel/Watching Another One-Touch Recording Daily Timer RecordingInstructions continue on Timer Recording cont’dTape Speeds Press the STATUS/EXIT button. Program WAS COMPress the PLAY/o button or the STOP/p button to select Checking or Cancelling Timer RecordingsPROGRAM, then press the F.FWD/B button Program REVIEW, then press the F.FWD/B buttonChannels Setting Up the VCR Plus+ Programming SystemSetting Up the VCR Plus+ Programming System cont’d Timer Recording With the VCR Plus+ Programming System Timer Recording With the VCR Plus+ Programming System cont’d Antenna Rerecording Tape DuplicationPress the F.FWD/B button so that on appears beside Repeat PlayReal-Time Counter Memory Forward and Reverse Searching SP/LP/SLP Special Effects PlaybackSuper High Speed Searching LP/SLP Viewing a Still PictureAutomatic Operation Features Cable Box/DBS Output Channel 03 or GlossaryHelpful Hints Helpful Hints cont’d Specifications Video Cassette Recorder Limited WarrantyAutomatic IndexVRZ223H1690.QX33 4/9/99 910 AM Supplied Accessories