Magnavox MSC455 owner manual Preparation for Use, To Select a Channel, To Preset the Channel Again

3. Preparation for Use

Turn on the Unit for the First Time

To Add/Delete Channels

Clock Set Up

1

Turn on the TV and set it to channel 3.

•If channel 3 is already occupied for broad- casting, see “RF Output Channel” section.

To Select a Channel

You can select a channel by using the Number buttons on the remote control.

Notes for using the Number buttons:

• When selecting cable channels

1 MENU

STOP PLAY

- M E N U -

TIMER PROGRAMMING AUTO REPEAT [OFF]

BCHANNEL SET UP CLOCK SET LANGUAGE SELECT AUDIO OUT

TV STEREO [ON] SAP

1 MENU

STOP PLAY

- M E N U -

TIMER PROGRAMMING AUTO REPEAT [OFF] CHANNEL SET UP

BCLOCK SET LANGUAGE SELECT AUDIO OUT

TV STEREO [ON] SAP

5			CLOCK SET
STOP	PLAY	MONTH DAY		YEAR
		1 0	/ 0 3 MON 2 0 0 5
or		HOUR MINUTE		AM/PM
		0 5	: – –	– –

which are higher than 99, enter

channel numbers as a three-digit

or

or • If the clock is not set, the CLOCK SET screen

Select the current hour.

F.FWD

2	STANDBY-ON		Remote Control	TV Screen
			LANGUAGE SELECT
			B ENGLISH	[ON]
	STOP	PLAY	FRANCAIS
			ESPAÑOL
		or
			F.FWD

3	CH 01
	F.FWD
	AUTO SET UP

number (for example: 117, press

[1], [1], [7]).

• You must precede single-digit

channel numbers with a zero (for

example: 02, 03, 04 and so on).

To Preset the Channel Again

1)	Press [MENU] until the main
	menu appears.
2)	Select "CHANNEL SET UP" by
	pressing [PLAY B] or [STOP C].
	Then, press [F.FWD g].
3)	Select "AUTO SET UP" by
	pressing [PLAY B] or [STOP C].
	Then, press [F.FWD g]. After
	scanning, the tuner stops on the
	lowest memorized channel.

		F.FWD
2		CHANNEL SET UP
STOP	PLAY	AUTO SET UP
		B MANUAL SET UP
	or
		F.FWD
3		MANUAL SET UP

appears when you press [MENU]. In this case, go to step 2).

			F.FWD
2			CLOCK SET
STOP	PLAY	MONTH DAY		YEAR
		1 0	/ – –	– – – –
	or	HOUR MINUTE		AM/PM
		– –	: – –	– –
		Select the current month.
			F.FWD
3

6			CLOCK SET
STOP	PLAY	MONTH DAY		YEAR
		1 0	/ 0 3 MON 2 0 0 5
or		HOUR MINUTE		AM/PM
		0 5	: 4 0	– –
		Select the current minute.
			F.FWD

7			CLOCK SET
STOP	PLAY	MONTH DAY		YEAR
		1 0	/ 0 3 MON 2 0 0 5

Do you connect the cable from the cable box or the satellite box to the VCR’s ANT-IN jack?

Yes

Yes Press [MENU] to exit.

To Change the On-Screen Language

1)	Press [MENU] until the main
	menu appears.
2)	Select "LANGUAGE SELECT" by
	pressing [PLAY B] or [STOP C].

STOP PLAY

or

CHANNEL 30 (CATV)

ADD

Select the channel to be added or deleted.

			CLOCK SET
STOP	PLAY	MONTH DAY		YEAR
		1 0	/ 0 3	– – – –
or		HOUR MINUTE		AM/PM
		– –	: – –	– –

Select the current day.

or	HOUR MINUTE	AM/PM
	0 5 : 4 0	P M AM
		B PM
	Select “AM” or “PM”.

• Refer to “Hint for Cable Box or	No
Satellite Box” section on page 1.

No Please wait for a few minutes.

After scanning...

•The tuner stops on the lowest memorized channel.

•You can select only the channels memorized

in the unit by using [CHANNEL ].

•If "AUTO SET UP" appears on the TV screen again, check the cable connections. Then, press [F.FWD g] once again.

Hint

•Repeat these steps only if either there was a power failure or if this unit has been unplugged for more than 30 seconds.

Then, press [F.FWD g].

3) Select "ENGLISH", "FRANCAIS"

or "ESPAÑOL" by pressing

[PLAY B] or [STOP C]. Then,

press [C.RESET/EXIT].

Hint

•If you accidentally select Spanish or French and need English: Press [MENU] and choose SELEC. IDIOMA, or SELECTION LANGUE. Press [F.FWD g] and select ENGLISH. Finally, press [C.RESET/EXIT].

4		MANUAL SET UP
REW	F.FWD	CHANNEL 30	(CATV)
	or	DELETE
		Select “ADD” or “DELETE”.

5 To exit the	EXIT
	C.RESET

menu.

			F.FWD
4			CLOCK SET
STOP	PLAY	MONTH DAY		YEAR
		1 0	/ 0 3	2 0 0 5
or		HOUR MINUTE		AM/PM
		– –	: – –	– –
		Select the current year.
			F.FWD

8To exit the CLOCK SET screen

F.FWD

Hint

•To go back one step, press [REW h] (during steps 2 to 7).

•Your clock setting will be lost if either there is a power failure or if this unit has been

unplugged for more than 30 seconds.

- 3 -

EN