Magnavox MSC455 owner manual Recording Features, Hints for Timer Recording

(Back of TV)

9. Recording Features

Timer Recording

•Insert a tape with its record tab into the unit.

Hints for Timer Recording

• If there is a power failure or the unit has been unplugged for more than 30 sec-

1 - M E N U -

BTIMER PROGRAMMING

MENU	AUTO REPEAT	[OFF]
	CHANNEL SET UP
	CLOCK SET
	LANGUAGE SELECT
	AUDIO OUT
	TV STEREO	[ON]
	SAP
	F.FWD

5 Select the desired start
time (hour).
STOP	PLAY	ONE TIME PROGRAM
	or	PROGRAM NUMBER			1
		DATE		10 / 2 4	MON
	F.FWD	START TIME		0 7 : 3 0	– –
		END	TIME	– – : – –	– –
		CHANNEL		– –
Select the		REC SPEED		– –
minute.
STOP	PLAY

9		ONE TIME PROGRAM
STOP	PLAY	PROGRAM NUMBER		1
		DATE	1 0 / 2 4	MON
or		START TIME	0 7 : 3 0	PM
		END TIME	0 8 : 3 0	PM
		CHANNEL	1 6
		REC SPEED	SP
		B SP
			SLP
	Select the desired recording speed.
		C.RESET
		EXIT

onds, the clock setting and all timer settings will be lost.

• If the tape runs out before the end time, the unit will switch to the Stop mode

immediately, eject the tape and the power will be turned off. The TIMER indicator

will flash.

• If a tape is not in the unit or does not have the record tab, the TIMER indicator

flashes and timer recording cannot be performed. Please insert a recordable tape.

• When all the Timer Recording are completed, the TIMER indicator flashes.

To play or eject the recorded tape, press [STANDBY-ON] first, and then

press [PLAY B] or [EJECT A].

To cancel a Timer Recording that is in progress

2

STOP PLAY

or

PROGRAM NUMBER 1

DATE	– – / – –
START TIME	– – : – –	– –
END TIME	– – : – –	– –
CHANNEL	– –
REC SPEED	– –

Select an empty program number.

or

F.FWD

10 Turn off the STANDBY-ON

VCR for recording.

• TIMER indicator on the VCR lights up.

Hint

Press [STOP/EJECT P / N] on the unit.

Copying a Video Tape

Warning: Unauthorized recordings of copyrighted video tapes may be an infringement of copyright laws.

(Back of Playing VCR) 1 (Back of Recording VCR*) 2

F.FWD

6		ONE TIME PROGRAM
STOP	PLAY	PROGRAM NUMBER			1
		DATE		1 0 / 2 4	MON
		START TIME		0 7 : 3 0	PM
		END	TIME	– – : – –	– –

•To go back one step, press

[REW h] (during steps 3) to 9) ).

AUDIO	Connect		Connect
	ANT	AUDIO	ANT
L	IN	L	IN
OUT IN	Audio/Video Cables	OUT IN	RF Cable
R

3

STOP PLAY

or

PROGRAM NUMBER 1

BONCE DAILY WEEKLY

Select “ONCE”, “DAILY” (Mon-Fri), or “WEEKLY”.

F.FWD

or	CHANNEL	– –
	REC SPEED	– –
		AM
		B PM
	Select “AM” or “PM”.
	F.FWD

7 Repeat the procedure in steps

5) and 6) to set the end time.

F.FWD

To Check, Correct, or Cancel a Timer Program

1) Turn the power on by pressing
	[STANDBY-ON].
2)	Select main menu by pressing
	[MENU].
3)	Select "TIMER PROGRAM-
	MING" by pressing [PLAY B] or
	[STOP C]. Then, press
	[F.FWD g].

OUT	(not supplied)	R	OUT	(supplied)
VIDEO		VIDEO
OUT IN		OUT IN

*Front input jacks are also available

1)	Insert a pre-recorded tape into the playing VCR.
2)	Insert a tape with its record tab into the recording VCR.
3)	Press [SPEED] on the remote control of the recording VCR to select
	the desired recording speed (SP/SLP).
4)	Select the “L1” or “L2” position on the recording VCR.

4Select the desired month.

STOP	PLAY	ONE TIME PROGRAM
	or	PROGRAM NUMBER			1
		DATE	1	0 / 0 3	MON
		START TIME	– – : – –		– –
	F.FWD	END TIME	– – : – –		– –
		CHANNEL	– –
		REC SPEED	– –

Select the desired day.

STOP PLAY

8

STOP PLAY

or

ONE TIME PROGRAM
PROGRAM NUMBER		1
DATE	1 0 / 2 4	MON
START TIME	0 7 : 3 0	PM
END TIME	0 8 : 3 0	PM
CHANNEL	1 6
REC SPEED	– –

Select the desired channel.

4) Select the program number

which you want to check by

pressing [PLAY B] or

[STOP C]. The details of the

program you selected will

appear on the TV screen.

• Go to the digit you want to

change by pressing

[F.FWD g] or [REW h].

Then, enter correct numbers by

pressing [PLAY B] or

	• To use the input jacks on the back of this unit, select "L1" position by
	pressing [0], [0], [1] on the remote control or [CHANNEL	].
	• To use the input jacks on the front of this unit, select "L2" position by
	pressing [0], [0], [2] on the remote control or [CHANNEL	].
5)	Press [RECORD] on the recording VCR.
6)	Begin playback of the tape in the playing VCR.
7)	To stop recording, press [STOP/EJECT P / N] on the recording
	VCR, then stop playback of the tape in the playing VCR.

Hint

or	• You can program one
	year in advance.
	F.FWD

•If you have connected the unit to a cable box or satellite box as the Connection on page 1, select the VCR to channel 3 or 4 (the RF output channel of the VCR).

Then, select the desired channel at the cable box or satellite box. Leave the cable box or satellite box on for timer recording.

F.FWD

[STOP C].

• You may cancel the entire program

by pressing [REW h] while the

program number flashes.

5)Press [C.RESET/EXIT] to exit.

6)Presss [STANDBY-ON] to return to timer stand-by mode.

- 6 -

•For best results during dubbing, use the VCR’s front panel controls whenever possible. The remote control might affect the playing VCR’s operation.

•Always use video-quality shielded cables with RCA-type connectors. Standard audio cables are not recommended.

•You can use a video disc player, satellite receiver, or other audio/video component with A/V outputs.

•“L1” or “L2” is found before the lowest memorized channel. (Example: CH02)

•"L2" input jacks are on the front of this unit.

EN