Magnavox VR602BMG, VR402BMG owner manual Recording One Channel/Watching Another

Page 26

26 Recording One Channel/Watching Another

1

Press the REC(ord)/OTR button to start a recording of the current channel. (See page 25.)

2

Press the VCR/TV button to put the VCR in TV position. The VCR Light will disappear from the VCR’s display panel.

3

Use the TV remote control to select the channel you want to watch at the TV.

4

To return to the channel being recorded, use the TV remote control to select channel 03 or 04 at the TV (the channel to which the CH3/CH4 switch on the back of the VCR is set).

5

Press the VCR/TV button to put the VCR in VCR posi- tion. The VCR Light will appear on the display panel. The channel being recorded will appear on the screen.

6

Press the STOP/p button to stop the recording.

2&5

	POWER		VCR/TV	EJECT
	1	2	3
	4	5	6
	7	8	9	CHANNEL
	7	8	9
		0
	SPEED	TIME SEARCH		MEMORY
	MENU	STATUS/EXIT	CLEAR	SLOW
1	REWIND	/PLAY		F.FWD
1	REC/OTR	/STOP		PAUSE/STILL
6

3

4

Select the channel you want to watch at the TV.

Select channel 03 or 04 at the TV.

Helpful Hint

•If you use a Cable Box or Direct Broadcast System hookup, you may not be able to watch one channel while recording another. See pages eight-nine for details.

Image 26

Contents VCR Warranty Verification For Customer UseIntroduction FeaturesSafety Precautions Declaration of ConformityTable of Contents VCR maintenance Before Using Your VCRPutting Batteries in the Remote Control Replace the battery compartment lidHookups Without a Cable Box/Direct Broadcast System Disconnect the antenna or cable from your TVHookups Without a Cable Box/Direct Broadcast System cont’d Plug in the TV and the VCRRecording/Viewing Any Channel Hookups With a Cable Box/Direct Broadcast SystemConnections TV’s Antenna Cable Signal Cable Box/DBSRecording One Channel/Watching Another Hookups with a Stereo TV VR602BMGPress the Menu button. The display shown below will appear Turning on Your VCR2Turn on the TV VR602BMG only Automatic Channel SetupPress the Menu button Automatic Channel Setup cont’d Adding/Deleting ChannelsReviewing Memorized Channels Press the STATUS/EXIT button once or twice to exitSetting the Clock Enter a 0 before a single-digit numberDaylight-Savings Time Language Selection Press the STATUS/EXIT buttonRemote Control Buttons Channel o/p Buttons Remote Control Buttons cont’dClear Button If you select Status ON, then select Counter only on On-Screen Status DisplaysStatus Display example only If you select Status ON, then select Counter only OFFVCR Display Panel Front Panel Rear Panel VHS Quasi Play Back Sqpb Other playback options and features are on pagesPlaying Read and follow the steps below to play a tapeInsert a tape with its record tab intact in the VCR VCR will record in a preset vol- umeRecording VCR Light does not appear, press the VCR/TV button onceRecording One Channel/Watching Another One-Touch Recording Daily Timer RecordingDo each step within 60 seconds of the previous step Timer Recording cont’d Instructions continue onTape Speeds Checking or Cancelling Timer Recordings Rerecording Tape Duplication RF coaxial cablePress the F.FWD/B button so that on appears beside Repeat PlayPress the PLAY/o button or the STOP/p button to select Real-Time Counter Memory Time Search Press the Time Search buttonSuper High Speed Searching LP/SLP Special Effects PlaybackForward and Reverse Searching SP/LP/SLP Viewing a Still PictureAutomatic Operation Features This indication is not available during tape playback Understanding On-Screen DisplaysSpecifically… MonitorMulti-Channel Television Sound System VR602BMG only cont’d Hi-Fi Stereo Sound System VR602BMG only Please see additional notes onBlue Background Helpful Hints Helpful Hints cont’d Glossary Cable Box/DBS Output Channel 03 orSpecifications Renewed Index Supplied Accessories

Related manuals

Manual 9 pages 10.87 Kb