Magnavox VR402BMG, VR602BMG owner manual Specifications

Page 45

Specifications 45

Video Heads

Four heads - Hi-Fi (VR602BMG)

Four heads (VR402BMG)

Video Signal

EIA standards; NTSC color

Antenna

VHF/UHF – 75 ohm external antenna terminal

VHF Output Signal

Channel 03 or 04 (switchable) 75 ohms unbalanced

Power Requirement

120V AC; 60Hz

Power Consumption

14W (VR602BMG)

12W (VR402BMG)

Operating Temperature

41°F (5°C) to 104°F (40°C)

Relative Humidity

10% to 80%

Weight

5.5lbs. (2.5 kg.) (VR602BMG)

5.3lbs. (2.4 kg.) (VR402BMG)

Dimensions

14-3/16” (W) x 3-5/8” (H) x 8-3/4” (D) (360mm x 92mm x 223mm)

Tuner Broadcast Channels

VHF 2-13, UHF 14-69

Cable TV Channels

1-125

NOTE: Designs and specifications are subject to change without notice.

Image 45

Contents VCR For Customer Use Warranty VerificationSafety Precautions FeaturesIntroduction Declaration of ConformityTable of Contents Putting Batteries in the Remote Control Before Using Your VCRVCR maintenance Replace the battery compartment lidDisconnect the antenna or cable from your TV Hookups Without a Cable Box/Direct Broadcast SystemPlug in the TV and the VCR Hookups Without a Cable Box/Direct Broadcast System cont’dHookups With a Cable Box/Direct Broadcast System ConnectionsRecording/Viewing Any Channel Cable Signal Cable Box/DBS Recording One Channel/Watching AnotherTV’s Antenna VR602BMG Hookups with a Stereo TVTurning on Your VCR 2Turn on the TVPress the Menu button. The display shown below will appear Automatic Channel Setup Press the Menu buttonVR602BMG only Adding/Deleting Channels Automatic Channel Setup cont’dPress the STATUS/EXIT button once or twice to exit Reviewing Memorized ChannelsEnter a 0 before a single-digit number Setting the ClockDaylight-Savings Time Press the STATUS/EXIT button Language SelectionRemote Control Buttons Remote Control Buttons cont’d Clear ButtonChannel o/p Buttons Status Display example only On-Screen Status DisplaysIf you select Status ON, then select Counter only on If you select Status ON, then select Counter only OFFVCR Display Panel Front Panel Rear Panel Playing Other playback options and features are on pagesVHS Quasi Play Back Sqpb Read and follow the steps below to play a tapeRecording VCR will record in a preset vol- umeInsert a tape with its record tab intact in the VCR VCR Light does not appear, press the VCR/TV button onceRecording One Channel/Watching Another One-Touch Recording Timer Recording Do each step within 60 seconds of the previous stepDaily Instructions continue on Timer Recording cont’dTape Speeds Checking or Cancelling Timer Recordings RF coaxial cable Rerecording Tape DuplicationRepeat Play Press the PLAY/o button or the STOP/p button to selectPress the F.FWD/B button so that on appears beside Real-Time Counter Memory Press the Time Search button Time SearchForward and Reverse Searching SP/LP/SLP Special Effects PlaybackSuper High Speed Searching LP/SLP Viewing a Still PictureAutomatic Operation Features Specifically… Understanding On-Screen DisplaysThis indication is not available during tape playback MonitorMulti-Channel Television Sound System VR602BMG only cont’d Please see additional notes on Hi-Fi Stereo Sound System VR602BMG onlyBlue Background Helpful Hints Helpful Hints cont’d Cable Box/DBS Output Channel 03 or GlossarySpecifications Renewed Index Supplied Accessories

Related manuals

Manual 9 pages 10.87 Kb