28 Timer Recording
Follow the steps below to program your VCR to record TV pro- grams while you’re away from home. The VCR will turn itself on, record, and turn itself off automatically. Before you begin:
●Set up the channels at the VCR.
●Set the clock.
●Put a tape in the VCR. Make sure the tape’s record tab is intact and the tape is long enough to record the program(s).
●Put the VCR in VCR position. The VCR Light will appear on the display panel. If it does not, press the VCR/TV button once.
Do each step within 60 seconds of the previous step.
POWER | VCR/TV | EJECT |
1
Press the MENU button.
SELECT op CHOOSE B
→PROGRAM VCR SET UP TUNER SET UP SET CLOCK
TO END PUSH EXIT
2
Press the PLAY/o button or the STOP/p button to select PROGRAM, then press the F.FWD/B button.
SELECT op CHOOSE B
→ONCE DAILY WEEKLY PROGRAM REVIEW
TO END PUSH EXIT
3
Press the PLAY/o button or the STOP/p button to select a ONCE, DAILY, or WEEKLY recording. Then, press the F.FWD/B button.
●ONCE: The VCR will record a TV program on any day you choose, up to 12 months away.
●DAILY: The VCR will record the same channel every day from Monday to Friday – starting at the same time and recording for the same length of time.
●WEEKLY: The VCR will record the same channel on the same day, at the same time, and for the same length of time every week.
Daily | DAILY PROGRAM |
PROGRAM |
Recording (example)
SELECT PROGRAM NUMBER
TO END PUSH EXIT
| 1 | 2 | 3 |
|
| 4 | 5 | 6 |
|
| 7 | 8 | 9 | CHANNEL |
|
| |||
|
| 0 |
|
|
1 | SPEED | TIME SEARCH | MEMORY | |
MENU | STATUS/EXIT CLEAR | SLOW | ||
| REWIND | /PLAY |
| F.FWD |
| REC/OTR | /STOP |
| PAUSE/STILL |
Helpful Hint
•If you need to make a correction while programming a timer record- ing, press the CLEAR button until the cursor is flashing on the item you want to change. Then enter the correct information.