Extron electronic IN1403 manual Problem The display device has a double image

Problem: The image on the display device is cropped on the right side.

•Solution 1: Reduce the output H-Position to line up the image on the display device. Use the blue screen.

•Solution 2: Adjust the monitor position or size controls to fit the image on the display device. Use the blue screen.

Problem: The image on the display device is cropped on the top.

•Solution 1: Increase the output V-Position to line up the image on the display device. Use the blue screen.

•Solution 2: Adjust the monitor position or size controls to fit the image on the display device. Use the blue screen.

Problem: The image on the display device is cropped on the bottom.

•Solution 1: Reduce the output V-Position to line up the image on the display device. Use the blue screen.

•Solution 2: Adjust the monitor position or size control to fit the image on the display device. Use the blue screen.

Problem: The display device has a double image.

•Solution: The IN1403 cannot separate multiple signal formats. Make sure that only one signal is connected to each input.

Problem: The image on the display device is black & white (no color).

•Solution: Set the input signal format to match the input signal connected to the rear of the unit.

Problem: The picture on the display device has hooking along the top.

•Solution 1: Increase the input horizontal tracking to compensate for poor quality video signals, such as from a VCR.

•Solution 2: The display device may need different sync serrations. Choose a different output sync from the sync format menu.

Problem: The image is frozen.

•Solution: Freeze is activated. Press FREEZE to deactivate the freeze frame feature.

Problem: The image on the display device is the wrong shape.

•Solution: The input aspect ratio is set incorrectly. Adjust the input aspect ratio to match the input video signal.

Problem: The image on the display device appears fuzzy.

•Solution 1: Adjust the video sharpness until the image regains its detail.

•Solution 2: Adjust the video noise filter until the image is sharp.

•Solution 3: Change the comb or trap filter setting (applicable only in composite video mode).

Problem: The Output Resolution will not decrease.

•Solution: The IN1403 can only scale up. Resolutions that would result in scaling down are not available.

IN1403 User’s Manual 25