Specifications

•Solution 1: The IN1403 can only scale up. Increase the output resolution until the desired aspect ratio is available.

•Solution 2: Manually decrease the image size by using the output menu.

•Solution 3: Select a different available aspect ratio.

•Solution: The IN1403 can only scale up. Increase the output resolution, and then reduce the size of the output image.

Number/signal type	3 S-video, 3 composite video
Connectors	S-video: 3 female 4-pin mini DIN
	Composite video: 3 female BNC, RGB pass through: 15-pin HD
Nominal level	1V p-p for Y of S-video, and for composite video
	0.3 Vp-p for C of S-video
Minimum/maximum levels	Analog: 0.0 V to 1.0 V p-p with no offset
Impedance	75 ohms
Return loss	<-30dB @ 5 MHz
DC offset (max. allowable)	1.5 V

Decoder	8 bit digital
Digital sampling	24 bit, 8 bits per color; 13.5 MHz standard
Colors	16.78 million

Number/signal type	1 scaled RGBHV, RGBS, or RGsB, 1 buffered output
Connectors	1 female 15-pin HD, 5 female BNC
Nominal level	0.7 Vp-p for RGB
Minimum/maximum levels	0.0 V to 0.7 Vp-p
Impedance	75 ohms
Scaled resolution	640 x 480, 800 x 600, 852 x 480, 1024 x 768, 1152 x 864, 1280 x 720
	(HDTV 720p), 1280 x 768, 1280 x 1024, 1365 x 768, 1365 x 1024

Output type	RGBHV, RGBS, RGsB
Standards	NTSC 3.58, NTSC 4.43, PAL, SECAM
Output level	TTL: 5.0V p-p, unterminated
Output impedance	75 ohms
Polarity	Positive or negative (selectable)

Serial control port	RS-232, 3.5 mm 5-pole captive screw connector
Baud rate and protocol	1200 to 38400 baud, 8 data bits, 1 stop bit, no parity
Serial control pin configurations	1 = TX, 2 = GND, 3 = RX
Program control	Extron Control Software

Power	100VAC to 240VAC, 50/60 Hz, 20 watts, internal, autoswitchable
Temperature/humidity	Storage -40° to +158°F (-40° to +70°C) / 10% to 90%, noncondensing
	Operating +32° to +122°F (0° to +50°C) / 10% to 90%, noncondensing
26	IN1403 User’s Manual