Menu Commands
Video Menu
The IN1402 allows you to manually adjust the brightness, contrast, color, hue, sharpness, gamma, noise filter, and comb/trap filter settings.
To access the video adjustment menu via the front panel control buttons
1.Press the desired Input Select button.
2.Press MENU.
3. | Press the | or | button (if necessary) to reach the video menu. | |||
4. | Press ENTER. |
|
|
| ||
5. | Use the | and | buttons and the ENTER key to select the setting you wish to adjust. | |||
6. | After selecting a setting, use the and buttons to make the adjustments. | |||||
7. | Press and release a button to move one step in either direction. | |||||
8. | Press and hold a button to move continuously through the adjustment range. | |||||
9. Press ENTER | tosave when the input is optimized. | |||||
CAUTION |
|
| ||||
|
|
| It is critical that you save the setting before proceeding to another input or another menu | |||
| ||||||
| function, | otherwise your new adjustment will be lost. | ||||
The following video adjustment parameterscan be controlled via the
Brightness Setting adjusts the input signal brightness.
Range: | 0 to 255 |
Factory default setting: 128 | |
Operation: | |
Press | button to increase the brightness. |
Press button to decrease the brightness.
Contrast adjusts the difference between the input signal’s brightest and darkest settings. At the minimum setting the screen picture displays at about the same brightness (very grayish). The maximum setting displays a noticeable difference between the darkest and lightest parts of the screen picture.
Range: | 0 to 255 |
Factory default setting: 128 | |
Operation: | |
Press | button to increase the contrast. |
Press button to decrease the contrast.
Color adjusts the color saturation of the picture over a wide range. Setting this control to 0 removes most of the color.
Range: | 0 to 255 |
Factory default setting: 140 | |
Operation: | |
Press | button to increase the color. |
Press button to decrease the color.
8 | IN1403 User’s Manual |