SC4/UF
MULTIFUNCTION ON-SCREEN DISPLAYS
BASIC OPERATION
Various displays appear, superimposed over the screen image, indicating the operation mode and features in use.
Operation mode
|
|
|
| QTR end time |
| Program title | |||||
|
|
|
| Channel/AV |
| ||||||
|
|
|
|
|
|
|
| ||||
|
|
|
|
|
|
|
|
|
|
|
|
p |
|
| QTR10:30PM |
|
| C 10 |
|
| |||
|
|
|
|
|
|
|
|
| |||
|
|
| SPORTS DIGEST |
|
|
|
|
| |||
| SP |
| 0:00:00 |
| 09:30PM | |||
|
|
|
|
|
|
|
|
|
Recording |
|
| Clock | |||||
tape speed |
|
|
|
| ||||
|
|
|
| Counter |
|
|
| |
Operation Mode Display
When an operation button is pressed, the corresponding operation mode icon is displayed in the top left corner of the screen for about 3 seconds.
NOTE: The recording pause mode icon will remain displayed until recording is resumed or stopped.
Operation | Icon | Operation | Icon |
Play | c | Record | a |
c c | Record pause | a h | |
Rewind | d d |
|
|
Status display
1Press the DISPLAY button on the remote control. The status display appears.
C 10
SP 0:00:00 | 09:30PM |
2To remove the status display, press the DISPLAY button (press the button twice if a tape is loaded in the VCR).
NOTE: The status display will not appear if a menu is displayed on screen, or during special playback.
Remaining Tape Duration Display
1Press the DISPLAY button twice.
The remaining tape duration appears at the bottom of the screen. It is calculated in hours and minutes from the current position to the end of the tape.
Channel Number Display | SP Tape remain 2:30 |
|
The channel number display appears for about 3 seconds when a channel is selected.
Program Title Display
When a channel is tuned or when normal playback is started, the program title (maximum 24 characters) will be displayed for about 4 seconds.
NOTES:
œThe program title is only displayed if the broadcast carries the title information or if it has been recorded on the tape.
œDepending on the TV signal or tape condition the program title may not be displayed even if it is available.
If “
2To remove the remaining tape duration display, press the DISPLAY button again.
NOTES:
œThe remaining tape duration display will not appear if a menu is displayed on screen or during special playback.
œThis feature will not work properly on
œDepending on the condition and type of tape used, the VCR may not accurately detect the remaining tape duration.
Recording Tape Speed Display
The recording tape speed is displayed for about 3 seconds after recording is started or when the tape speed is changed. The “SS” display means that the smart speed record function is used (see page 24).
15