Fisher FVH-E420 Checking the Program Timer, Clearing the Program Timer

Page 32

SC4/UF (FVH-E420 GB) Wed. Jan. 26/2000

PROGRAM TIMER RECORDING

Setting a Program Timer Recording Using the Buttons on the VCR

If the remote control does not operate or is not available you can use the buttons on the VCR front panel to set a program timer recording.

NOTE: Eject the cassette tape, before proceeding with the steps below.

1Press and hold the REC button on the front panel for about 5 seconds.

The Timer program menu appears.

If the clock has not yet been set, the Clock set menu appears.

If necessary, the clock can also be set using the CHANNEL l (or j) and FF buttons. (Refer to the next step for button functions.)

2Use the CHANNEL l (or j) and FF buttons on the VCR front panel to program the timer.

CHANNEL button: To select numbers or switch

settings

FFbutton:To select the next item

NOTE: If you enter the wrong number or setting, press the REW button to return to the wrong number or setting, then enter the correct one.

3When the recording tape speed is set, press the FF button on the front panel to save the settings.

4When finished, press the REC button on the front panel to exit from the menu.

5Load a cassette.

6Press the POWER button.

NOTES:

œDaily or weekly recording, or the program type cannot be set using this method.

œOnce a program timer recording has been set, it cannot be erased using the buttons on the VCR front panel.

Checking the Program Timer

1Turn on the power (TV and VCR).

2Set the TV to channel 3 or 4.

3Press the MENU button. The main MENU appears.

4Press the OK button.

The programmed recordings are listed.

NOTE: To display the program type or rating, press the TYPE button after selecting the desired program using the ù (or û) button.

5When finished, press the MENU button to exit the menu.

6Press the POWER button.

The VCR power turns off and the timer is set to the recording standby mode.

The Timer icon (n) appears.

Clearing the Program Timer

1Follow steps 1 4 in “Checking the Program Timer”.

2Press the ù (or û) button to select the program to be cleared.

3Press the CLEAR button.

The erase confirmation screen appears.

4Press the CLEAR button again. (To cancel the erase procedure, press the SET button.)

The selected timer program is erased from the program memory.

5When finished, press the MENU button to exit the menu.

6Press the POWER button.

Changing the Program Timer

1Follow the steps under “Clearing the Program Timer” to erase the program that you wish to change.

2Follow the steps under “Timer Programming” to add a new timer program.

31

Image 32
Contents FVH-E420 Precautions Moisture Condensation ProblemsLocation Avoiding Electric Shock or FireFeaturescontents AccessoriesVHS Video Cassette Tapes Locations of Controls and Indicators Front PanelLocations of Controls and Indicators Indicator PanelOperation Icons Example of IndicationsBack Panel Locations of Controls Remote ControlUsing the remote control Important Note Remote ControlBattery Installation and Operation Basic ANTENNA/CABLE Connections VCRAlternative Cable TV Connections When the TV does not have a built-in cable converterWhen you have both cable and pay TV scrambled channels Important Notes Cable converter/decoder output channel setupAlternative Cable TV Connections AUDIO/VIDEO Connections Before starting Initial SetupAuto RF output channel setting will start Initial Setup Channel Selection ConvenienceManual Erase Manual ProgrammingMultifunction ON-SCREEN Displays Main Menu Options ON-SCREEN MenuDisplaying the On-Screen Menus ON-SCREEN Menu Displaying the VCR Setup Menus Before startingVCR Setup Menu Options Clock set menu appears Setting the ClockAutomatic Clock Adjustment Standard/Daylight Time Adjustment Setting the ClockManual Clock Setting Channel Programming Changing the Menu LanguageProgramming Channels Playback of Copyguarded Tapes Viewing TV onlyPlaying a Rental Tape Tracking Control Adjustments Normal PlaybackTracking Control Manual Tracking ControlRecording Input Options Rec. List Super FeatureRecording One Program While Viewing Another Recording Smart Speed Record FunctionRec. List Recording Contents List Super Rec. List SuperEntering the Program Type Type input menu will be displayed on screenSpecial Playback Index Search e will be displayed on-screen Zero SearchIndex Search Program Timer Recording Timer ProgrammingTimer program menu appears End time AM/PM setting will be entered automaticallySmart Time Record Function Program Timer RecordingType and Smart Time Rec. setting menu appears Changing the Program Timer Checking the Program TimerClearing the Program Timer Using Timer Recording for Several Programs Timer Setting NotesAppears on the VCR display Quick Timer Recording QTRAuto Setting Child Lock Forward picture search begins Sound is mutedMaintenance Head Care and CleaningCabinet Cleaning AV indicator L1 is displayed instead of a channel numberTroubleshooting Guide Symptom Possible Cause Corrective ActionSpecifications General Specifications