SC4/UF
BASIC OPERATION
SETTING THE CLOCK
Manual Clock Setting
1Follow the steps in Before starting.
2Press the MENU button. The main MENU appears.
If the clock has not yet been set, the Clock set menu appears.
3Press the ù (or û) button to select the Clock set option, then press the OK button.
The Clock set menu appears.
@@@@@@@Clock@set
@MM/DD[@@@]@@YY@HH:MM
[<]†Cancel
[MENU]†Back@to@TV
4Press the number buttons (0 – 9) to set the date and time.
œEXAMPLE: Setting the clock to standard time. March 7, 2001, 9:30 PM (03/07/01, 9:30 PM).
œ Date March 7: | Press 0 | – 3 – 0 – 7 |
Year ’01: | Press 0 | – 1 |
Time 9:30: | Press 0 | – 9 – 3 – 0 |
PM: | Press > |
|
@@@@@@@Clock@set
@03/07[Wed]2001@09:30@PM
[ùû]†Day/STD@shift [>]†AM/PM [<]†Cancel [OK]†Set
NOTES:
œWhen entering the year, press the two number buttons that correspond to the last two digits of the year (i.e. 00 for 2000, 05 for 2005 or 25 for 2025).
œIf you press the wrong button, press the < button to erase the wrong number. Then press the correct button to continue.
5When finished, press the OK button to save the settings.
Standard/Daylight Time Adjustment
The clock time can be easily changed to daylight saving time (by adding one hour) or standard time (by subtracting one hour).
1Press the MENU button. The main MENU appears.
2Press the ù (or û) button to select the Clock set option, then press the OK button.
3Press the ù (or û) button.
Every time the ù (or û) button is pressed, 1 hour is subtracted (or added) to the displayed time.
4When finished, press the OK button to save the settings.
19