Topfield TF 600 PVRc manual Connecting to the broadcasting cable, Connecting to your television

Page 18

12 Setup

If you have any problem with your setup or need help, contact your dealer.

2.4.1 Connecting to the broadcasting cable

Whatever sort of connection you have be- tween the digital receiver and the television, you need to connect the digital receiver to the broadcasting cable so that it can receive digital television services.

Connect the broadcasting cable to the CABLE 1 IN connector on the back panel of the digital receiver.

Also, you must ensure that there is a connec- tion to both the CABLE 1 IN and CABLE 2 IN connectors on your digital receiver, so that both tuners work properly.

Normally you do that by using a loop cable to link from the CABLE 1 OUT connector to the CABLE 2 IN connector.

If you have another digital receiver, you may link it from the CABLE 2 OUT connector.

2.4.2 Connecting to your television

Between all the following connectors of the digital receiver, we recommend you to use the ﬁrst connector to get best picture quality. If your television does not have the matching connector, then use the next connector in the following order for better picture quality.

1.HDMI connector (HDMI)

2.SCART connector (TV)

3.S-Video connector (S-VIDEO)

4.Composite connector (VIDEO)

Image 18

Contents TF 600 PVRc Page Contents Service Search Listing Services Index Features IntroductionControlling the digital receiver Front panel Remote control Mo e Is used to set a sleep timerDisplays teletext § 5.6 for information about picture-in-picture What is common interface? Setup Safety precautionsUnpacking Safety precautions Rear panel connections Connecting up your digital receiver VCRConnecting to the broadcasting cable Connecting to your televisionTo use the Hdmi connector To use the S-Video connector Switching on for the ﬁrst time Connecting to your video cassette recorderInserting batteries in the remote control Powering on and checking picture Preference Settings Language settingsSubtitle language Video and audio settings Television standardColour model Video cassette recorder Television aspect ratioVideo and audio settings Audio mode High deﬁnition televisionVideo scaling Local time setting Preference Settings Time offset table City Parental controlParental control Adjusting the on-screen display To turn on the time shift featureService Search Searching broadcasting servicesResetting to factory settings Clearing the services list Clearing the services listVolume control Daily UsageWatching television Watching television Favourite services list Viewing programme information Selecting audio tracks Selecting subtitle tracksViewing teletext Viewing electronic programme guide Using time shift Watching multifeed programmeUsing time shift Using picture in picture Listing Services Editing the favourite listButton and the highlight bar get moved to How to use on-screen keyboard Transferring receiver dataListing Services Recording and Playing Recording a programme Instant recordingRecording a programme Timer recording Recording a programme Recording and Playing Scheduling recordings using the programme guide Recording a time-shifted programmeRecording a pay service programme File archive To delete a recordingTo sort recordings To lock a recording To rename a recordingTo move a recording to another folder To navigate using the progress bar Playing back a recordingTo play in slow motion To play in fast motionTo make a bookmark To play back a recording repeatedlyTo play back recordings in sequence To play back a scrambled recordingCopying a recording MP3 playbackTransferring recording ﬁles Instructions on how to use Altair are as follows Formatting the hard disk Accessing to The Digital Receiver via The Internet To access within the local area network Conﬁguring the routerTo access on the level of the Internet Accessing to The Digital Receiver via The Internet IP conﬁguration Advance conﬁguration Proﬁle Accessing to The Digital Receiver via The Internet Accessing the web server Accessing to The Digital Receiver via The Internet Accessing the FTP server Accessing to The Digital Receiver via The Internet Topﬁeld Application Program 74 Topﬁeld Application Program Firmware Update Checking the ﬁrmware informationAutomatic ﬁrmware update via LAN port From the network via LAN portManual ﬁrmware update via LAN port From your computer via USB portFrom your computer via RS-232 port From another digital receiver via RS-232 port Index Video Wlan ANT Page Correct disposal of this product