Topfield TF 600 PVRc manual From another digital receiver via RS-232 port

Page 85

10.5 From another digital receiver via RS-232 port 79

1.Press the Find button to select the new ﬁrmware ﬁle.

2.Press the download button, and then turn on the digital receiver to start the ﬁle trans- fer.

3.A countdown will be displayed on screen

4.Restart the digital receiver when the ﬁle transfer is complete.

10.5From another digital receiver via RS-232 port

It is possible to transfer the ﬁrmware from the digital receiver to another same digital receiver by connecting them with a RS- 232 cable. To update the ﬁrmware with this method, perform the following steps:

1.Turn off the target digital receiver.

2.Plug one end of a RS-232 cable (9 pin D-

sub cable) into the RS-232 port on the dig- ital receiver, and the other end into the matching port on the other digital receiver.

3. Turn on the source digital receiver if not already on.

4.Select the Installation > Transfer Firmware > Transfer Firmware to Other IRD menu, then you get asked for conﬁrmation; select Yes.

5.Turn on the target digital receiver to start the ﬁrmware transfer.

6.A progress bar appears showing the progress of the ﬁrmware transfer.

7.Restart the target digital receiver when the ﬁrmware transfer is complete.

Image 85

Contents TF 600 PVRc Page Contents Service Search Listing Services Index Introduction FeaturesControlling the digital receiver Front panel Mo e Is used to set a sleep timer Remote controlDisplays teletext § 5.6 for information about picture-in-picture What is common interface? Safety precautions SetupUnpacking Safety precautions Rear panel connections VCR Connecting up your digital receiverConnecting to your television Connecting to the broadcasting cableTo use the Hdmi connector To use the S-Video connector Connecting to your video cassette recorder Switching on for the ﬁrst timeInserting batteries in the remote control Powering on and checking picture Language settings Preference SettingsSubtitle language Television standard Video and audio settingsColour model Television aspect ratio Video cassette recorderVideo and audio settings High deﬁnition television Audio modeVideo scaling Local time setting Parental control Preference Settings Time offset table CityParental control To turn on the time shift feature Adjusting the on-screen displaySearching broadcasting services Service SearchResetting to factory settings Clearing the services list Clearing the services listDaily Usage Volume controlWatching television Watching television Favourite services list Viewing programme information Selecting subtitle tracks Selecting audio tracksViewing teletext Viewing electronic programme guide Watching multifeed programme Using time shiftUsing time shift Using picture in picture Editing the favourite list Listing ServicesButton and the highlight bar get moved to Transferring receiver data How to use on-screen keyboardListing Services Recording and Playing Instant recording Recording a programmeRecording a programme Timer recording Recording a programme Recording and Playing Recording a time-shifted programme Scheduling recordings using the programme guideRecording a pay service programme To delete a recording File archiveTo sort recordings To rename a recording To lock a recordingTo move a recording to another folder Playing back a recording To navigate using the progress barTo play in fast motion To play in slow motionTo play back a recording repeatedly To make a bookmarkTo play back a scrambled recording To play back recordings in sequenceMP3 playback Copying a recordingTransferring recording ﬁles Instructions on how to use Altair are as follows Formatting the hard disk Accessing to The Digital Receiver via The Internet Conﬁguring the router To access within the local area networkTo access on the level of the Internet Accessing to The Digital Receiver via The Internet IP conﬁguration Advance conﬁguration Proﬁle Accessing to The Digital Receiver via The Internet Accessing the web server Accessing to The Digital Receiver via The Internet Accessing the FTP server Accessing to The Digital Receiver via The Internet Topﬁeld Application Program 74 Topﬁeld Application Program Checking the ﬁrmware information Firmware UpdateFrom the network via LAN port Automatic ﬁrmware update via LAN portFrom your computer via USB port Manual ﬁrmware update via LAN portFrom your computer via RS-232 port From another digital receiver via RS-232 port Index Video Wlan ANT Page Correct disposal of this product