76 Firmware Update
NOTE
You can only update with firmwares of which system identifi- cation is identical to that of yours. Otherwise you will fail in firmware update.
10.2From the network via LAN port
You can get a new firmware from the network via LAN port.
Select the Installation > LAN Set- ting > IP Configuration menu.
You should see a screen like the left figure.
You may assign a dynamic IP ad- dress to the digital receiver. To do so, set the DHCP option to On.
If you have a static IP address, set the DHCP option to Off, then the IP Address, Subnet Mask and Gateway options become enabled. You have to set these options according to your IP address.
10.2.1 Automatic firmware update via LAN port
To update the firmware automatically, follow the steps below:
1.Plug a LAN calbe into the LAN port on the digital receiver.
2.Select the Installation > LAN Setting menu.
3.Set the Auto LAN Firmware Upgrade option to On, then turn off the digital receiver.