Topfield TF 600 PVRc manual Video and audio settings, Television standard, Colour model

Page 25

3.2 Video and audio settings 19

3.2Video and audio settings

You have to conﬁgure the video and audio settings appropriately to your television set and other appliances.

Select the System Setting > A/V Output Setting menu. You should see a screen like the left ﬁgure.

3.2.1 Television standard

The digital receiver supports two television standards. One is PAL standard, and the other is NTSC standard. PAL was adopted in European countries while NTSC is adopted in USA, Canada, Mexico and so forth.

If you have a PAL television, you have to set the TV Type option to PAL. In that case, if you switch to a service of the NTSC standard, the digital receiver will presents the pictures converting into the PAL standard. However, it is inevitable to lose a little picture quality. Likewise, the contrary case brings about the same result.

The best thing is to watch PAL services with a PAL television and to watch NTSC services with a NTSC television. However, a multi television set is able to process both of them. So if you have a multi television set, you had better set the TV Type option to Multi. Then the digital receiver will present pictures without standard conversion.

3.2.2 Colour model

Through the TV SCART connector, the digital receiver is able to output video in various colour models. If you have the

Image 25

Contents TF 600 PVRc Page Contents Service Search Listing Services Index Introduction FeaturesControlling the digital receiver Front panel Mo e Is used to set a sleep timer Remote controlDisplays teletext § 5.6 for information about picture-in-picture What is common interface? Safety precautions SetupUnpacking Safety precautions Rear panel connections VCR Connecting up your digital receiverConnecting to your television Connecting to the broadcasting cableTo use the Hdmi connector To use the S-Video connector Connecting to your video cassette recorder Switching on for the ﬁrst timeInserting batteries in the remote control Powering on and checking picture Language settings Preference SettingsSubtitle language Television standard Video and audio settingsColour model Television aspect ratio Video cassette recorderVideo and audio settings High deﬁnition television Audio modeVideo scaling Local time setting Parental control Preference Settings Time offset table CityParental control To turn on the time shift feature Adjusting the on-screen displaySearching broadcasting services Service SearchResetting to factory settings Clearing the services list Clearing the services listDaily Usage Volume controlWatching television Watching television Favourite services list Viewing programme information Selecting subtitle tracks Selecting audio tracksViewing teletext Viewing electronic programme guide Watching multifeed programme Using time shiftUsing time shift Using picture in picture Editing the favourite list Listing ServicesButton and the highlight bar get moved to Transferring receiver data How to use on-screen keyboardListing Services Recording and Playing Instant recording Recording a programmeRecording a programme Timer recording Recording a programme Recording and Playing Recording a time-shifted programme Scheduling recordings using the programme guideRecording a pay service programme To delete a recording File archiveTo sort recordings To rename a recording To lock a recordingTo move a recording to another folder Playing back a recording To navigate using the progress barTo play in fast motion To play in slow motionTo play back a recording repeatedly To make a bookmarkTo play back a scrambled recording To play back recordings in sequenceMP3 playback Copying a recordingTransferring recording ﬁles Instructions on how to use Altair are as follows Formatting the hard disk Accessing to The Digital Receiver via The Internet Conﬁguring the router To access within the local area networkTo access on the level of the Internet Accessing to The Digital Receiver via The Internet IP conﬁguration Advance conﬁguration Proﬁle Accessing to The Digital Receiver via The Internet Accessing the web server Accessing to The Digital Receiver via The Internet Accessing the FTP server Accessing to The Digital Receiver via The Internet Topﬁeld Application Program 74 Topﬁeld Application Program Checking the ﬁrmware information Firmware UpdateFrom the network via LAN port Automatic ﬁrmware update via LAN portFrom your computer via USB port Manual ﬁrmware update via LAN portFrom your computer via RS-232 port From another digital receiver via RS-232 port Index Video Wlan ANT Page Correct disposal of this product