Topfield TF 600 PVRc Switching on for the ﬁrst time, Connecting to your video cassette recorder

Page 21

2.5 Switching on for the ﬁrst time 15

To enjoy Dolby digital audio, your televi- sion or audio system must be able to decode Dolby digital audio, and you will need to obtain a S/PDIF cable. Plug one end of the cable into the S/PDIF socket on the digi- tal receiver, and plug the other end into the matching socket on your audio system.

2.4.3 Connecting to your video cassette recorder

The digital receiver can also output video to another appliance such as a video cassette recorder or video receiver through an auxiliary SCART connector.

You will need to obtain a SCART cable to use the auxiliary SCART connector. Plug one end of the cable into the VCR socket on the digital receiver, and plug the other end into the matching socket on your video cassette recorder or suchlike.

2.5Switching on for the ﬁrst time

Now that you have your digital receiver connected, you should plug it in to a mains socket. Ensure that your television set is turned on, so that you will be able to see the display from the digital receiver.

2.5.1 Inserting batteries in the remote control

To insert the batteries, open the battery compartment by remov- ing the lid, and then insert the batteries observing the polarity, which is marked on the base of the battery compartment.

If the digital receiver no longer reacts properly to remote con- trol commands, the batteries may be ﬂat. Be sure to remove

Image 21

Contents TF 600 PVRc Page Contents Service Search Listing Services Index Introduction FeaturesControlling the digital receiver Front panel Mo e Is used to set a sleep timer Remote controlDisplays teletext § 5.6 for information about picture-in-picture What is common interface? Setup Safety precautionsUnpacking Safety precautions Rear panel connections VCR Connecting up your digital receiver Connecting to your television Connecting to the broadcasting cableTo use the Hdmi connector To use the S-Video connector Switching on for the ﬁrst time Connecting to your video cassette recorderInserting batteries in the remote control Powering on and checking picture Language settings Preference SettingsSubtitle language Video and audio settings Television standardColour model Television aspect ratio Video cassette recorderVideo and audio settings Audio mode High deﬁnition televisionVideo scaling Local time setting Parental control Preference Settings Time offset table CityParental control To turn on the time shift feature Adjusting the on-screen displaySearching broadcasting services Service SearchResetting to factory settings Clearing the services list Clearing the services listVolume control Daily UsageWatching television Watching television Favourite services list Viewing programme information Selecting audio tracks Selecting subtitle tracksViewing teletext Viewing electronic programme guide Watching multifeed programme Using time shiftUsing time shift Using picture in picture Editing the favourite list Listing ServicesButton and the highlight bar get moved to Transferring receiver data How to use on-screen keyboardListing Services Recording and Playing Instant recording Recording a programmeRecording a programme Timer recording Recording a programme Recording and Playing Recording a time-shifted programme Scheduling recordings using the programme guideRecording a pay service programme File archive To delete a recordingTo sort recordings To lock a recording To rename a recordingTo move a recording to another folder Playing back a recording To navigate using the progress barTo play in fast motion To play in slow motionTo play back a recording repeatedly To make a bookmarkTo play back a scrambled recording To play back recordings in sequenceMP3 playback Copying a recordingTransferring recording ﬁles Instructions on how to use Altair are as follows Formatting the hard disk Accessing to The Digital Receiver via The Internet Conﬁguring the router To access within the local area networkTo access on the level of the Internet Accessing to The Digital Receiver via The Internet IP conﬁguration Advance conﬁguration Proﬁle Accessing to The Digital Receiver via The Internet Accessing the web server Accessing to The Digital Receiver via The Internet Accessing the FTP server Accessing to The Digital Receiver via The Internet Topﬁeld Application Program 74 Topﬁeld Application Program Checking the ﬁrmware information Firmware UpdateFrom the network via LAN port Automatic ﬁrmware update via LAN portFrom your computer via USB port Manual ﬁrmware update via LAN portFrom your computer via RS-232 port From another digital receiver via RS-232 port Index Video Wlan ANT Page Correct disposal of this product