3.6 Playing back recordings | 43 |
To use this ‘resume playback’ feature, simply highlight a pro- gramme in the archive list, and then press the 
button on the remote, instead of OK. Playback will start from the same place where you stopped viewing previously.
While resume play is useful when you want to carry on where you left off, sometimes you might want to mark favourite parts of a programme, like a great song in a concert. You can do that by creating bookmarks, and you can have as many of them in a programme as you like.
To create a bookmark, you first need to display the Progress bar, which is done by pressing the 
button. Next, press the Green button on the remote control, and you’ll see a small green dot appear just above the bar, like the picture below.
If you press the Green button when you’re at or close to the position of a bookmark, it will be removed, so if you realise you didn’t want to set one, a second press will remove it.
To jump to a bookmark, display the Progress bar again, and press the Yellow key. You’ll see the marker move to the next bookmark, and playback will continue from that point. If there are several bookmarks, just press Yellow until you reach the correct one.
If the PVR interrupts your playback, for example because it needs your attention when a recording starts or ends, it will create a bookmark automatically at your current position, so you can jump back to where you were easily.