JVC DR-MH200SE manual Auto Set Up, Before starting, make sure of the following, Enter

INITIAL SETTINGS EN 17

Auto Set Up

Auto Channel Set/Auto Clock Set/Auto Guide Programme Number Set

After the A button on the unit (or DVD A on the remote control) is pressed for the first time to turn on the unit, by simply selecting your country*, the Auto Set Up function sets the tuner channels, clock** and Guide Programme numbers automatically.

*If you live in Belgium (BELGIUM) or Switzerland (SUISSE), you also need to select your language.

*If you live in Hungary (MAGYARORSZÁG), Czech Republic (ČESKÁ REPUBLIKA), Poland (POLSKA) or other countries in Eastern Europe (OTHER EASTERN), set the clock manually.

3Press selection keys to select the language of your choice, then press ENTER. The AUTO SET/ T-V LINK display appears on the TV screen.

4Press selection keys to select AAUTO SETB, then press ENTER. The AUTO SET screen will appear.

●When AUTO SET is completed, ASCAN COMPLETEDB appears on the TV screen. Select AOKB.

INITIAL SET UP > LANGUAGE SELECT

ENGLISH	DEUTSCH	FRANCAIS
ITALIANO	ESPAÑOL	NEDERLANDS

SVENSKA	NORSK	SUOMI
DANSK
		RETURN

SET UP	ENTER	SELECT WITH @ THEN PRESS [ENTER]
EXIT		PRESS [SET UP] TO EXIT
	SELECT
INITIAL SET UP > AUTO CH SET
		AUTO SET	T-V LINK

1

CABLE/SAT

TV DVD

DVD A

ENTER

Selection Keys

FGDE

Before starting, make sure of the following:

●The TV aerial cable should be connected to the unit.

●The unit’s mains power cord should be connected to a mains outlet.

●Turn on the TV and select the AV mode.

●Slide the TV/CABLE/SAT/DVD switch to DVD.

1Press A on the unit or DVD A on the remote control to turn on the unit. The Country Set display appears on the TV screen.

SET UP	ENTER	SELECT WITH @ THEN PRESS [ENTER]
		PRESS [SET UP] TO EXIT
EXIT	SELECT
INITIAL SET UP > AUTO SET
		AUTO SET
		PLEASE WAIT...
		CANCEL
SET UP	ENTER	SELECT WITH @ THEN PRESS [ENTER]
		PRESS [SET UP] TO EXIT
EXIT	SELECT

ATTENTION:

AAUTOB blinks on the front display panel; do NOT press any button on the unit or remote control until the front display panel shows A– –:– –Bas illustrated on page 19.

●When you have connected the unit to a TV offering T-V Link via a fully-wired 21-pin SCART cable (A pg. 16) and the TV is turned on, the unit automatically performs the Preset Download

(A pg. 18) even if you select AAUTO SETB for Auto Set Up function.

ATTENTION:

Once you have performed Auto Set Up, even if the unit’s memory backup has expired, all the stored stations and their Guide Programme numbers remain in the unit’s memory and the unit will not perform Auto Set Up again. The unit only performs Auto Clock Set when the unit is turned on.

If you have moved to a different area, perform each setting as required.

●Tuner setting (A pg. 74)

●Clock setting (A pg. 77)

If a new station starts broadcasting in your area, perform tuner setting. (A pg. 74)

NOTES:

● In areas where no TV station transmits a PDC (Programme

Delivery Control) signal, the unit can perform neither Auto Clock

Set nor Auto Guide Programme Number Set.

● If there is a power cut, or if you press A or SET UP while Auto

Set Up is in progress, Auto Set Up will be interrupted; be sure to

2Press selection keys to select your country’s name, then press

ENTER.

NOTES:

●If you have selected

ABELGIUMB or ASUISSEB, go to step 3.

●If you have selected

INITIAL SET UP > AREA SELECT

BELGIUM	ČESKÁ REPUBLIKA	DANMARK
DEUTSCHLAND	ESPAÑA	GREECE
ITALIA	MAGYARORSZÁG	NEDERLAND

	NORGE	ÖSTERREICH	POLSKA
	PORTUGAL	SUISSE	SUOMI
	SVERIGE	OTHER WESTERN	OTHER EASTERN
			RETURN
SET UP	ENTER	SELECT WITH @ THEN PRESS [ENTER]
		PRESS [SET UP] TO EXIT

turn off the unit power once and try again from step 1.

● Auto Clock Set may not function properly depending on the

reception condition.

● If no sound accompanies the picture or the audio sounds

unnatural on some channels that have been stored by Auto Set

Up, the TV system setting for those channels may be incorrect.

Select the appropriate TV system for those channels. (A pg. 76,

AINFORMATIONB)

After AAuto Set UpB is completed, perform AMonitor SetB on

AMAGYARORSZÁGB,

EXIT SELECT

page 21.

AČESKÁ REPUBLIKAB,

APOLSKAB or AOTHER EASTERNB, press ENTER. The Clock Set screen appears. Set the clock manually (A pg. 77), then go to step 4.

●If you have selected any other country name, go to step 4.