JVC DR-MH200SE Output/Input Set, Output And L-1 Input Setting, Press selection keys to select

64 EN EDITING

	Output/Input Set	* The boldface settings below indicate the settings at your purchase.
8 L-1 OUTPUT ^ SCART VIDEO / SCART S-VIDEO / SCART
			RGB / COMPONENT
● Turn on the TV and select the AV mode.			SCART VIDEO:
● Slide the TV/CABLE/SAT/DVD switch to DVD.			If a connected appliance’s input is compatible only with regular
			video signals, set to ASCART VIDEOB.

CABLE/SAT

TVDVD

ENTER

Selection Keys

FGDE

SCART S-VIDEO:

If a connected appliance’s input is compatible with Y/C signals, set to ASCART S-VIDEOB. You can obtain high-quality picture. (For connection, be sure to use a 21-pin SCART cable that is compatible with the Y/C signal.)

SCART RGB:

If a connected appliance’s input is compatible with RGB signals, set to ASCART RGBB. You can obtain a high-quality RGB picture.

COMPONENT:

If a connected appliance’s input is compatible with Y/PB/PR signals, set to ACOMPONENTB. You can obtain a high-quality Y/ PB/PR picture. Switch the TV to the input that you can watch component video pictures.

SET UP

L-1 Output And L-1 Input Setting

The [L-1 IN/OUT] connector accepts and delivers either a composite signal (regular video signal) or a Y/C signal (a signal in which the luminance and chrominance signals are separated). Set

AL-1 OUTPUTB and AL-1 INPUTB to the appropriate mode depending on the type of appliance connected to the unit’s [L-1 IN/OUT] connector.

1Press SET UP to access the Main Menu screen.

2Press selection keys to select AFUNCTION SET UPB, then press G.

8L-1 INPUT ^ VIDEO / S-VIDEOVIDEO:

If a connected appliance’s output is compatible only with regular video signals, set to AVIDEOB.

S-VIDEO:

If a connected appliance’s output is compatible with Y/C signals, set to AS-VIDEOB.You can obtain a high-quality picture. (For connection, be sure to use a 21-pin SCART cable that is compatible with the Y/C signal.)

NOTES:

●If AL-1 OUTPUTB is set to ASCART S-VIDEOBor ASCART RGBB, it is not possible to set AL-1 INPUTB to AS-VIDEOB.

●If AL-2 SELECTB is set to ASAT S-VIDEOBor ADECODERB, it is not possible to set AL-1 INPUTB to AS-VIDEOB.

●If AL-2 SELECTB is set to ADECODERB, it is only possible to set AL-1 OUTPUTB to ASCART VIDEOB.

●Component video signals are not output from the [L-1 IN/OUT] connector.

●When Progressive scan mode is engaged, it is not possible to select the setting of AL-1 OUTPUTB. (A pg. 64)

3Press selection keys to select AVIDEO IN/ OUTB, then press G.

4Press selection keys to select

AL-1 OUTPUTB or AL-1 INPUTB, then press ENTER.

5Press selection keys to select the appropriate setting, then press ENTER.

6Press SET UP to

complete the setting.

\

DVD VIDEO SET UP			HDD/DVD SET UP		FUNCTION SET UP			INITIAL SET UP
REC/PLAY SET UP				DISPLAY SET	VIDEO IN/OUT
	MONITOR TYPE					4:3LB
	F-1 INPUT
						VIDEO
	L-1 OUTPUT					SCART VIDEO
	L-1 INPUT
						VIDEO
	L-2 SELECT					VIDEO
SET UP		ENTER		SELECT WITH @ THEN PRESS [ENTER]
				PRESS [SET UP] TO EXIT
	EXIT	SELECT
DVD VIDEO SET UP			HDD/DVD SET UP		FUNCTION SET UP			INITIAL SET UP
REC/PLAY SET UP			DISPLAY SET		VIDEO IN/OUT
	MONITOR TYPE					4:3LB
	F-1 INPUT
						VIDEO
	L-1 OUTPUT					SCARTSCARTVIDEOVIDEO
	L-1 INPUT					SCART S-VIDEO
						VIDEO
							SCART RGB
	L-2 SELECT					VIDEOCOMPONENT

SET UP	ENTER	SELECT WITH @ THEN PRESS [ENTER]
		PRESS [SET UP] TO EXIT
EXIT	SELECT