JVC DR-MH200SE manual Preset Download, Set/Auto Guide Programme Number Set

18 EN INITIAL SETTINGS

	Preset Download				If you have connected the unit to your TV via a 21-pin SCART
					cable (A pg. 16), the unit will automatically perform Preset
					Download instead of the Auto Set Up in step 4 on page 17. After
Auto Channel Set by Downloading from TV/Auto Clock
					downloading, the unit sets the clock and Guide Programme
Set/Auto Guide Programme Number Set					numbers automatically.
					● Slide the TV/CABLE/SAT/DVD switch to DVD.
					● Perform steps 1 to 3 of AAuto Set UpB (A pg. 17) before
ATTENTION:
					continuing.
You can use this function only with a TV offering T-V Link, etc.*
					1 Press selection keys to
Be sure to use a fully-wired 21-pin SCART cable.
* Compatible with TVs offering T-V Link, EasyLink, Megalogic,					select AT-V LINKB and	INITIAL SET UP > AUTO CH SET
		SMARTLINK, Q-Link or DATA LOGIC via a fully-wired 21-pin SCART			press ENTER. The
		cable. The degree of compatibility and available functions may differ by			T-V LINK screen will
		system.
					appear.			AUTO SET	T-V LINK
					● When T-V LINK is
			CABLE/SAT		completed, ASCAN
			TV	DVD	COMPLETEDB appears
					on the TV screen. Select	SET UP	ENTER SELECT WITH @ THEN PRESS [ENTER]
					AOKB.			PRESS [SET UP] TO EXIT
						EXIT	SELECT

INITIAL SET UP > T-V LINK

T-V LINK

PLEASE WAIT...

ENTER

Selection Keys

DE

		CANCEL
SET UP	ENTER	SELECT WITH @ THEN PRESS [ENTER]
		PRESS [SET UP] TO EXIT
EXIT	SELECT

ATTENTION:

Preset positions on the front display panel increase from APR 1B; do NOT press any button on the unit or remote control until the front display panel shows clock time, APR 1B or A– –:– –Bas illustrated on page 19.

●If you press any button on the unit or remote control while downloading is in progress, it will be interrupted.

NOTES:

●For details, refer to the instruction manual of your TV.

●In areas where no TV station transmits a PDC (Programme Delivery Control) signal, the unit can perform neither Auto Clock Set nor Auto Guide Programme Number Set.

●If there is a power cut, or if you press A or SET UP while downloading or set up is in progress, it will be interrupted; be sure to turn off the unit power once and try again from the beginning.

●Auto Clock Set may not function properly depending on the reception condition.

●On this unit, the characters available for station names (ID) are A–Z, 0–9, –, Z, + and & (space). Some names of downloaded stations may differ from those of your TV. (A pg. 76)

After APreset DownloadB is completed, perform AMonitor SetB on page 21.