JVC DR-M150SEK manual How Discs Are Overwritten, Programmed Disc

Filename [M150SEK_07Timer Recording.fm]
M150SEK_00.book Page 40 Wednesday, June 15, 2005 4:04 PM	Masterpage:Left+

40 EN TIMER RECORDING

To Timer Record The Programme With The	How Discs Are Overwritten
Programmed Disc
	(Example 1)
	To record a 1-hour serial drama every Friday in SP mode
1 Load a programmed disc.

2Press DVD A to turn off the power.

● appears on the front display panel, and the unit enters into timer standby mode.

● To disengage the timer mode, press DVD A again. Blank 1st 2nd 1st

NOTES:

●On-Disc Timer Programming is not possible on a DVD-R or DVD- RW (Video mode) disc.

●The information of a programme recorded with On-Disc Timer Programming is not stored in the library.

●The play list is not created for the programmes recorded with On- Disc Timer Programming.

●Programmes recorded with On-Disc Timer Programming cannot

be edited or protected.	2nd	3rd	4th	3rd
● On-Disc Timer Programmed discs cannot be used for other
recordings other than On-Disc Timer Programming.

●On-Disc Timer Programmed discs cannot be used on units from other manufacturers.

● The beginning of a programme may not be recorded. In addition,	The first programme is		The second programme is
if the 1st programme’s recording stop time and the 2nd
	overwritten by the third.		overwritten by the fourth.
programme’s recording start time is the same, the ending of the
	(Example 2)
1st programme may not be recorded.
● If there is a power outage while recording, the recordings when	To record a 15-minutes serial drama every morning in XP
the power outage occurs are not guaranteed.	mode
	4th	1st	8th	5th
	12/6	12/3	12/10	12/7
	3rd	2nd	7th	6th
	12/5	12/4	12/9	12/8

(Example 3)

To record a 90-minutes serial drama every Sunday in SP mode

Blank

1st

3rd

2nd

Blank

Areas treated as blank cannot be played back even if they contain recorded material.

Blank

NOTE:

On-Disc Timer Programming may not always work as these examples.