Filename [M150SEK_10Subsidiary.fm] |
|
M150SEK_00.book Page 59 Wednesday, June 15, 2005 4:04 PM | Masterpage:Right0 |
|
SYSTEM CONNECTIONS EN 59
Connecting To A Satellite Receiver
Connect the satellite receiver to the
NOTES:
●Set
●You can use the Automatic Satellite Programme Recording function with this connection. (A pg. 42)
●To record a programme via the satellite receiver, select
●For details, refer to the instruction manual of the satellite receiver.
Outdoor unit | Aerial |
Satellite cable | TV aerial cable |
Satellite receiver
ANTENNA IN
ANTENNA OUT
TV
Rear of unit
IMPORTANT
When you set
●If you turn on the unit when the satellite receiver’s power is off, nothing appears on the TV screen. In this case, turn on the satellite receiver, or set the TV to its TV mode, or slide the TV/ DVD switch to TV to set the unit to the AV mode.
Connecting To A Dolby Digital Decoder Or An Amplifier With
These instructions enable you to connect your unit to a Dolby Digital Decoder or an amplifier with
Dolby Digital Decoder or amplifier with
To DIGITAL AUDIO
input
Coaxial cable (not supplied)
To [DIGITAL OUT (COAXIAL)]
Rear of unit
1Connect the unit and a Dolby Digital Decoder or an amplifier with
NOTE:
For details on [DIGITAL AUDIO OUT] connector setting, refer to ADIGITAL AUDIO OUTB. (A pg. 60)