Filename [M150SEK_10Subsidiary.fm] |
|
M150SEK_00.book Page 70 Wednesday, June 15, 2005 4:04 PM | Masterpage:Left+ |
| |
70 EN TROUBLESHOOTING |
|
Timer Recording
Timer programming cannot be made.
●Date and time is not correct.
] Set date and time correctly. (A pg. 18, 66)
●Timer recording is in progress.
] Timer programming can’t be performed while a timer recording is in progress. Wait until it finishes.
Timer programming recording does not start.
●Date and time is not correct.
] Set date and time correctly. (A pg. 18, 66)
EPG Timer Programming cannot be made.
●Date and time is not correct.
] Set date and time correctly. (A pg. 18, 66)
●The channel number does not correspond to that in the
receiving area.
] Set the correct channel number for the receiving broadcast. (A pg. 17, 64)
The EPG system does not timer record properly.
●The unit’s channels have been set incorrectly.
] Refer to AAuto Channel SetB (A pg. 64) and
Automatic Satellite Programme Recording does not start.
●The satellite receiver is not connected properly to this unit. ] Connect the satellite receiver to the unit’s
properly. (A pg. 42)
On the front display panel, AcB appears.
●Power failure occurred.
] Set date and time correctly. (A pg. 66)
Other Problems
The image of the TV broadcast appears distorted on the TV screen.
] Press PROGRESSIVE SCAN for 3 or more seconds so that the Video output indicator (q) lights off on the front display panel.
Whistling or howling is heard from the TV during camcorder recording.
●The camcorder’s microphone is too close to the TV.
] Position the camcorder so its microphone is away from the TV.
●The TV’s volume is too high. ] Turn the TV’s volume down.
When scanning channels, some of them are skipped over.
●Those channels have been designated to be skipped.
] If you need the skipped channels, restore them using AManual Channel SetB. (A pg. 64)
Channel settings that were made manually seem to have changed or disappeared.
●After the manual settings were made, Auto Channel Set was performed.
] Do no perform Auto Channel Set after making manual settings, proceed to perform AClock SetB (A pg. 66).
Malfunction occurs and the unit cannot be power off.
] Reset the unit by disconnecting the AC power plug from the AC outlet and connect again.
The disc space does not increase when recorded titles are cleared.
●The PC’s data recorded on a
] Format the disc. (When the disc is soiled, wipe the disc with a soft dry cloth before formatting.) (A pg. 10, 67)
APROGRAMME FULLB appears on the TV screen during timer programming.
●All 8 programmes have already been timer programmed. ] Clear unnecessary programmes on the unit, then try timer
programming again.