LG Electronics RCT689H owner manual Hdmi Connection, Additional Information for Hdmi, About Hdmi

Page 15

Connecting 15

HDMI Connection

If you have a HDMI TV or monitor, you can connect it to this player using a HDMI cable (Type A). Connect the HDMI jack on the unit to the HDMI jack on a HDMI compatible TV or monitor.

Rear of this unit

HDMI cable

TV

Set the TV’s source to HDMI (refer to TV’s Owner’s manual).

Additional Information for HDMI

yy When you connect a HDMI or DVI compatible device make sure of the following:

-- Try switching off the HDMI/DVI device and this player. Next, switch on the HDMI/DVI device and leave it for around 30 seconds, then switch on this player.

-- The connected device’s video input is set correctly for this unit.

-- The connected device is compatible with 720x480p, 1280x720p, 1920x1080i or 1920x1080p video input.

yy Not all HDCP-compatible HDMI or DVI devices will work with this player.

-- The picture will not be displayed properly with non-HDCP device.

-- This player does not playback and TV screen is changed to black screen.

,,Note

yy When you use the HDMI connection, you can change the resolution (576i, 576p, 720p, or 1080i) for the HDMI output using RES. button on the front panel.

yy If your TV is NOT capable of handling 96 kHz sampling frequency, set the [Sampling Freq.] option to [48 kHz] on the setup menu (See page 28).

yy When this choice is made, this unit will automatically convert any 96 kHz signals to 48 kHz so your system can decode them.

yy If your TV is not equipped with Dolby Digital and MPEG decoder, set the [Dolby Digital] and [MPEG] options to [PCM] on the setup menu (See page 28).

yy If your TV is not equipped with DTS decoder, set the [DTS] options to [OFF] on the setup menu (See page 28). To enjoy DTS multi channel surround, you must connect this recorder to a DTS compatible receiver via one of this recorder’s digital audio outputs.

yy The arrow on the cable connector body should face up for correct alignment with the connector on the recorder. If your TV is NOT capable of handling 96 kHz sampling frequency, set the [Sampling Freq.] option to [48 kHz] on the setup menu (See page 28).

About HDMI

HDMI (High Definition Multimedia Interface) supports both video and audio on a single digital connection for use with DVD Players, Set-Top Boxes, and other AV devices.

HDMI was developed to provide the technologies of HDCP (High Definition Contents Protection). HDCP is used to protect digital content transmitted and received.

HDMI has the capability to support standard, enhanced, or high-definition video plus standard to multi-channel surround-sound audio, HDMI features include uncompressed digital video,

a bandwidth of up to 5 gigabytes per second, one connector (instead of several cables and connectors), and communication between the AV source and AV devices such as DTVs.

2

Connecting

RC689D-P.BITALLU_MFL65225535_ENG.indd 15

11. 2. 1. �� 12:12

Page 14 Page 16
Image 15
Page 14 Page 16
Contents Digital & Analog DVD recorder/VCR player combi RC689D-P.BITALLUMFL65225535ENG.indd Instructions in the literature accompanying the product Safety InformaionSafety way to remove the battery or Battery from the equipment RemoveDisposal of your old appliance Getting Started Table of Contents Troubleshooting Supplied Accesorries About the 7 Symbol Display Symbols Used in this ManualWhat is SIMPLINK? IntroductionDVD-R Recordable DiscsDVD+R DVD-RWRecommended recordable DVD discs Playable DiscsRegional Code Audio Files File compatibilityOverall Video FilesRemote control Battery InstallationClear Rear panel Front panelConnecting to Your TV Antenna connection to your TV and this unitRF Cable Rear of this unit Rear of this unit Hdmi cable Hdmi ConnectionAdditional Information for Hdmi About HdmiComponent Video Connection Scart connectionSacrt cable Connecting to an Amplifier Connecting to an Amplifier via Digital Audio OutputAmplifier/Receiver Audio cable Rear of this unit Connecting to an Amplifier via 2 Channel Audio OutputDV Digital Camcorder Connecting a Digital CamcorderConnection to Another device Front of the unitPlayback content in the USB device USB device connectionCompatible USB Flash Drive Auto Set Up ManualAuto General Settings Adjust the Setup SettingsHome Menu Overview Auto Programming Manual Channel AddProgram Edit MFT Station RenameProgram Edit SeekManual Clock Set Auto Clock SetAntenna Feed VCR Play AspectVCR Play System Video output formatLanguage Settings DRC Dynamic Range Control Audio SettingsDolby Digital Sampling FreqDTV Rating Lock SettingsLock System DVD RatingSet Password Area CodeDivX Reg. Code Recording Settings DVD-RW/DVD+RW/DVD+RDL Disc SettingsDisc Format FinalizeMPAUSE/STEP Disc LabelDisc Protect MENU/LIST, DisplayWatching TV General ExplanationOn-Screen Display Displaying Information WhileTV Viewing Program Selection Selection Teletext in ServicePress Text or Return x to switch off teletext Teletext OperationPlayback Setup General FeaturesPlaying a DVD Slow Motion Checking the Contents of DVD Video DiscsStill Picture and Frame-by-Frame PlaybackSubtitles Changing the Audio SoundtrackChanging the Audio Channel 3D SurroundTracking Control Playing a VCRPreparation Normal PlaybackCounter Memory Function Playing a DivX Movie DiscStill Picture and Frame-by-Frame Playback Slow MotionAbout DivX movie files Movie menu optionsPlaying an Audio CD or MP3/ WMA Disc About WMAWindow Media Audio Viewing a Jpeg FileSearch Audio CD only About MP3Object Skip ImagesRotate Images View Slide ShowsDVD Recording DVD RecordingBasic Recording from a TV Restrictions on video recordingRecordable disc To Extend the Recording Time Instant Timer RecordingTimer Recording Checking the Recording TimeDuplicate Date The space on the disc is insufficient Checking Timer Recording DetailsCanceling a Timer Recording Stopping a Timer Recording in ProgressRecording from External Components To exit the Title List menu, press Return x repeatedly DVD EditingTitle List and Chapter List Menu Overview Current mediaAbout word ‘Original’ and ‘Playlist’ VR Mode Original and Playlist EditingTitles, Chapters and Parts Is editing a DVD like editing a video tape?Deleting an Original or Playlist Title/ Chapter Adding Additional Title / Chapters to the PlaylistYyzPLAY Inserts a space at the cursor position Remote Control buttons for entering a nameDeleting a Part Naming a TitleMoving a Playlist Chapter Hide a Chapter/TitleOptions appear on the left side of the screen Protect a Title Divide One Title Into TwoUse this function to combine two adjacent chapters into one Combining Two Chapters Into OneYou can remove the Title List menu by pressing Hide, chapter combine, added chapter mark, etcBefore DV dubbing DubbingDubbing from VCR to DVD Recording from DV InputYy The source signal must be DVC-SD format Recording from a Digital CamcorderDV-Related Messages General TroubleshootingResetting the unit Symptom Cause & SolutionRecording PlaybackYy The earlier programme takes priority OFF on the setup menuJacks DVD+RDL recorded on the discManufacturer Code Number Controlling a TV with the Supplied Remote ControlSetting up the remote to control your TV By pressing You canArea Code List Choose an area code from this listArea Code Language Code Language code ListTrademarks and Licenses Input SpecificationsGeneral RecordingSystem Handling the Unit MaintenanceRC689D-P.BITALLUMFL65225535ENG.indd
Top Page Image Contents