System Setting 31
Recording Settings
Rec Mode Set
You can set the picture quality for recording; XP (High Quality), SP (Standard Quality), LP (Low Quality), EP (Extend Quality), MLP (Maximum Long Play)
1.Select the [Rec Mode Set] option then press d.
2.Use s/w to select a desired Rec Mode Set (XP, SP, LP, EP or MLP).
[XP] – Highest quality setting, gives about 1 hour of recording time on a DVD (4.7GB).
[SP] – Default quality, sufficient for most applications, gives about 2 hours of recording time on a DVD (4.7GB).
[LP] – Slightly lower video quality, gives about 4 hours of recording time on a DVD disc (4.7GB).
[EP] – Low video quality, gives about 6 hours of recording time on a DVD (4.7GB).
[MLP] – The longest recording time with the lowest video quality, gives you about 14 hours of recording time on a DVD (4.7GB).
DV Rec Audio
You need to set this if you have a camcorder using
[Audio 1]
On the Audio 1 setting, the sound that was recorded while shooting is used..
[Audio 2]
On the Audio 2 setting, the overdubbed sound is used.
TV Rec Audio
When TV recording with bilingual, you can choose audio channel to record.
[Main+Sub]
Main language and Sub language.
[Main]
Main language only
[Sub]
Sub language only.
3
System Setting
,,Note
You may see a fragmented picture or distorted subtitle during playing back the contents recorded in EP and MLP mode.
Rec Aspect
When recording, you can set the recording aspect ratio to suit the material you’re recording (16:9 or 4:3).
,,Note
When DVD recording, you can set the recording aspect ratio to suit the material you’re recording (16:9 or 4:3).
Auto Chapter
When DVD recording, chapter markers are put in specified setting. You can change this interval to 5 minutes, 10 minutes or 15 minutes. If you select [None], switch off automatic chapter marking altogether with the [None] setting.
| 11. 2. 1. �� 12:12 |