LG Electronics RCT689H owner manual Disc Settings, Disc Format, Finalize, Dvd-Rw/Dvd+Rw/Dvd+Rdl

Page 32

32System Setting

3

System Setting

Disc Settings

Disc Format

If you load a completely blank disc, the recorder will initialize the disc.

[DVD-R]

The recorder initialize the disc to Video mode. The recording mode will always be Video mode.

[DVD-RW/DVD+RW/DVD+R(DL)]

The Initialize menu will appears. Select [OK] then press ENTER (b). DVD-RW disc is initialized to Video mode.

Also, you can reformat the DVD-RW/DVD+RW from the Setup menu as below.

1.Select [Disc Format] option then press d.

2.Press ENTER (b) while [Start] is selected. Format Disc menu appears.

3.Use a/dto select a desired mode (VR Mode or Video Mode) then press ENTER (b). Confirm message will appear.

For DVD+RW discs, go to step 4.

4.Use a/dto select [OK] then press ENTER (b). It takes a few moments to initialize the disc.

>>Caution

If you want to change the disc format, everything recorded on the disc will be erased.

Finalize

Finalizing [fixes] the recordings in place so that the disc can be played on a regular DVD player or computer equipped with a suitable DVD-ROM drive.

Finalizing a disc creates a menu screen for navigating the disc. This is accessed by pressing MENU/LIST or TITLE.

>>Caution

yy Once you have finalized a DVD-R and DVD+R disc, you cannot edit or record anything else on that disc.

yy You can record and edit a DVD-RW disc by choosing [Unfinalize] option.

yy You can edit or record on the DVD+RW disc even after finalizing.

1. Select [Finalize] option then press d.

2.Press ENTER (b) while [Finalize] is selected. Finalize menu appears.

3.Select [OK] then press ENTER (b). The recorder starts finalizing the disc.

,,Note

yy How long finalization takes depends on the type of disc, how much is recorded on the disc, and the number of titles on the disc.

yy DVD+R DL disc can take up to 30 minutes to finalize.

yy If you load a DVD-RW that has already been finalized, you can ‘Unfinalize’ it by choosing Unfinalize from the Finalize menu. After doing this, you can edit and re-record onto the disc.

yy You cannot unfinalize a DVD-R and DVD+R disc.

yy If [Disc Protect] option is set to [ON], the finalize is not available. To finalize, set [Disc Protect] option to [OFF].

RC689D-P.BITALLU_MFL65225535_ENG.indd 32

11. 2. 1. �� 12:12

Image 32

Contents Digital & Analog DVD recorder/VCR player combi RC689D-P.BITALLUMFL65225535ENG.indd Safety Informaion Instructions in the literature accompanying the productDisposal of your old appliance Safety way to remove the battery orBattery from the equipment Remove Getting Started Table of Contents Troubleshooting About the 7 Symbol Display Symbols Used in this Manual What is SIMPLINK?Introduction Supplied AccesorriesRecordable Discs DVD+RDVD-RW DVD-RRegional Code Recommended recordable DVD discsPlayable Discs File compatibility OverallVideo Files Audio FilesClear Remote controlBattery Installation Front panel Rear panelRF Cable Rear of this unit Connecting to Your TVAntenna connection to your TV and this unit Hdmi Connection Additional Information for HdmiAbout Hdmi Rear of this unit Hdmi cableSacrt cable Component Video ConnectionScart connection Amplifier/Receiver Connecting to an AmplifierConnecting to an Amplifier via Digital Audio Output Connecting to an Amplifier via 2 Channel Audio Output Audio cable Rear of this unitConnecting a Digital Camcorder Connection to Another deviceFront of the unit DV Digital CamcorderCompatible USB Flash Drive Playback content in the USB deviceUSB device connection Auto Auto Set UpManual Home Menu Overview General SettingsAdjust the Setup Settings Program Edit Auto ProgrammingManual Channel Add Station Rename Program EditSeek MFTAuto Clock Set Manual Clock SetVCR Play Aspect VCR Play SystemVideo output format Antenna FeedLanguage Settings Audio Settings Dolby DigitalSampling Freq DRC Dynamic Range ControlLock Settings Lock SystemDVD Rating DTV RatingDivX Reg. Code Set PasswordArea Code Recording Settings Disc Settings Disc FormatFinalize DVD-RW/DVD+RW/DVD+RDLDisc Label Disc ProtectMENU/LIST, Display MPAUSE/STEPGeneral Explanation On-Screen DisplayDisplaying Information While Watching TVTV Viewing Program Selection Teletext in Service Press Text or Return x to switch off teletextTeletext Operation SelectionPlaying a DVD Playback SetupGeneral Features Checking the Contents of DVD Video Discs Still Picture and Frame-by-FramePlayback Slow MotionChanging the Audio Soundtrack Changing the Audio Channel3D Surround SubtitlesPlaying a VCR PreparationNormal Playback Tracking ControlPlaying a DivX Movie Disc Still Picture and Frame-by-Frame PlaybackSlow Motion Counter Memory FunctionMovie menu options About DivX movie filesPlaying an Audio CD or MP3/ WMA Disc Viewing a Jpeg File Search Audio CD onlyAbout MP3 About WMAWindow Media AudioSkip Images Rotate ImagesView Slide Shows ObjectDVD Recording DVD RecordingRecordable disc Basic Recording from a TVRestrictions on video recording Instant Timer Recording Timer RecordingChecking the Recording Time To Extend the Recording TimeChecking Timer Recording Details Canceling a Timer RecordingStopping a Timer Recording in Progress Duplicate Date The space on the disc is insufficientRecording from External Components DVD Editing Title List and Chapter List Menu OverviewCurrent media To exit the Title List menu, press Return x repeatedlyVR Mode Original and Playlist Editing Titles, Chapters and PartsIs editing a DVD like editing a video tape? About word ‘Original’ and ‘Playlist’Adding Additional Title / Chapters to the Playlist Deleting an Original or Playlist Title/ ChapterRemote Control buttons for entering a name Deleting a PartNaming a Title YyzPLAY Inserts a space at the cursor positionOptions appear on the left side of the screen Moving a Playlist ChapterHide a Chapter/Title Divide One Title Into Two Protect a TitleCombining Two Chapters Into One Use this function to combine two adjacent chapters into oneHide, chapter combine, added chapter mark, etc You can remove the Title List menu by pressingDubbing Dubbing from VCR to DVDRecording from DV Input Before DV dubbingDV-Related Messages Yy The source signal must be DVC-SD formatRecording from a Digital Camcorder Troubleshooting Resetting the unitSymptom Cause & Solution GeneralPlayback RecordingOFF on the setup menu JacksDVD+RDL recorded on the disc Yy The earlier programme takes priorityControlling a TV with the Supplied Remote Control Setting up the remote to control your TVBy pressing You can Manufacturer Code NumberArea Code Area Code ListChoose an area code from this list Language code List Language CodeTrademarks and Licenses Specifications GeneralRecording InputSystem Maintenance Handling the UnitRC689D-P.BITALLUMFL65225535ENG.indd