LG Electronics RCT689H Troubleshooting, General, Resetting the unit, Symptom Cause & Solution

5

Troubleshooting

62Troubleshooting

Troubleshooting

General

Symptom	Cause & Solution
The Power does not turned on.	yy Plug the power cord into the wall outlet securely.
The unit does not start	yy Insert a playable disc. (Check the disc type, color system, and regional
playback.	code.)
	yy Place the disc with the playback side down.
	yy Place the disc on the disc tray correctly inside the guide.
	yy Clean the disc.
	yy Cancel the Rating function or change the rating level.
The angle cannot be changed.	yy Multi-angles are not recorded on the DVD Video being played.
	yy The angle cannot be changed for the titles recorded on this unit.
Cannot play movie, photo or	yy The files are not recorded in a format that the unit can play.
audio files.	yy The unit does not support the codec of the movie file.
The channel is not found or	yy Check your antenna connection.
stored.
The remote control does not	yy The remote control is not pointed at the remote sensor of the unit.
work properly.	yy The remote control is too far from the unit.
	yy There is an obstacle in the path between the remote control and the
	unit.
	yy The batteries in the remote control are exhausted.
	yy The remote’s manufacturer code returned to the default setting when
	you replaced the batteries. Reset the code (page 65).
Resetting the unit

Symptom	Cause & Solution
If you observe any of the	yy The unit is plugged in, but the power will not turn on or off.
following symptoms.	yy The front panel display is not working.
	yy The unit is not operating normally.
You can reset the unit as	yy Press and hold the POWER (1) button for at least five seconds. This
follows.	will force the unit to power off then turn the unit back on.
	yy Unplug the power cord, wait at least five seconds, and then plug it in
	again.

RC689D-P.BITALLU_MFL65225535_ENG.indd 62 11. 2. 1.

��12:12