Programming the Remote Control to Operate Other Devices
The HD DVR remote control is a
ote
The remote control may not be able to control all models of other brands.
1To find out whether your remote control can operate a device withoutTest your remote control.
programming, turn on the device such as a VCR and select the corre- sponding mode (VCR) using MODE on the remote control while pointing at the device. Use POWER and CH +/– buttons to see if the device responds properly. If not, the remote control mode needs to be pro- grammed to operate the device.
2 Turn on the device to be programmed. Then select the correspon - ding mode (VCR, AUX, TV, DVD or STB) with the MODE button on the remote control.
3The remote control is now ready to program a code for the device.Press POWER and MUTE buttons simultaneously.
4First, if you press CH + buttons repeatedly, the codes will change one atThere are two ways to find the correct code for the device.
a time. If the right code is found, the device will turn off.
Second, enter the code number using the number buttons on the remote control. Code numbers for various device can be found on the following pages. If the code is correct, the device will turn off.
5Press EXIT button to store the programming code.
Test the remote control functions to see if the device responds
6 properly. If not, repeat from step 2 to step 6 above.
60