Basics Features Overview (Continued)
– (dash) |
Numbers button |
FLASHBK |
CH +/– |
|
|
| SURF |
|
|
| ||
|
|
VOL +/–
MUTE
SIGNAL
Channel Selection
Follow instructions below to select channels.
Number and – (dash) buttons (on the remote control)
Use Number
FLASHBK button (on the remote control)
Press to return to the previous channel you viewed. For example, if the HD DVR is tuned to channel 55 and then you change to channel 26, pressing FLASHBK will return to channel 55.
SURF button (on the remote control)
Press to scroll through your Surf channels.
CH +/– buttons (on the remote control) or v / V (on the front panel)
Use CH +/– on the remote control or v / V on the front panel to cycle the HD DVR through the channels in memory.
Volume Adjustment
Adjusts the sound for variable analog audio out from the HD DVR.
VOL +/– buttons (on the remote control) or b / B (on the front panel)
Use VOL +/– on the remote control or b / B on the front panel to adjust the volume for analog audio out on the HD DVR.
MUTE (on the remote control)
Press MUTE to turn off the sound for analog audio out on the HD DVR.
otes
•Before setting Audio Variable to Off, make sure that you have turned down the TV’s volume to the minimum. Otherwise, sudden high volume sound may cause hearing or speaker damage.
•The volume of Digital Audio out on HD DVR can not be adjusted on the HD DVR front panel.
Signal
Press SIGNAL on the remote control to display the signal strength bar. Shows the signal strength bar for the incoming signal. This can be used to help you adjust the antenna to the correct position for your location. You can view the signal strength bar by pressing SIGNAL on the remote control.
ip
Refer to www.antennaweb.org for finding the optimal antenna position. AntennaWeb.org, will help you determine the proper outdoor antenna to use in order to receive your local broadcast television channels.
26