Daewoo DRV-6815 user manual Disc Format, Disc Finalize

DF-H7DD3D-FB-I(GB) 2007.7.25 2:53 PM ˘ ` 30 mac001 1200DPI 100LPI

Setup menu

Disc > Format Disc > Finalize

If you load a completely blank disc to the DVD Recorder + VCR, the recorder will initialize the disc to DVD+VR mode.

Also, you can reformat the DVD-RW/DVD+RW from the Setup menu as below.

¥If you want to change the disc format, everything recorded on the disc will be erased.

¥While disc is initialized, the red disc mark appear on TV screen.

1Press [SETUP].

2Use [É/ ] to select ÔDiscÕ.

3 While ÔDiscÕ is selected, press [É/ ] to select ÔFormatÕ. And press [ENTER].

4Press [ENTER] to start formatting the disc.

Disc

		Format			DVD+VR
		Finalize
		Protect
		Disc Label
		Disc Info
ENTER	Confirm		MENU	Back	SETUP	Exit
Disc
		Format			DVD+VR
		Finalize
		Protect
		Disc Label
		Disc Info
ENTER	Confirm		MENU	Back	SETUP	Exit
				Format

Formatting DVD, please wait...

80%

Finalizing ÔfixesÕ the recordings in place so that the disc can be played on a regular DVD player or computer equipped with a suitable DVD-ROM drive.

Finalizing a Video mode disc creates a menu screen for navigating the disc. This is accessed by pressing [MENU].

Once you have finalized a DVD-R and DVD+R disc, you cannot edit or record anything else on that disc except DVD+RW. However, you can record and edit a DVD-RW disc by choosing ÔUnfinalizeÕ option.

1Press [SETUP].

2Use [É/ ] to select ÔDiscÔ.

3 While ÔDiscÕ is selected, press [É/ ] to select ÔFinalizeÕ. And press [ENTER].

4The Finalize menu will appear. Select ÔOKÔ and press [ENTER].

The recorder starts finalizing the disc.

Disc

Format

Finalize

Protect

Disc Label

Disc Info

ENTER Confirm	MENU Back	SETUP Exit
Finalize/Unfinalize
Do you want to finalize this disc?
OK	Cancel

Finalize/Unfinalize

Finalizing disc, please wait...

80%

30