Checking the Recording Time, Copy Edit DVD VCR

Daewoo DRV-6815 user manual Checking the Recording Time, To Pause the Recording, Copy Edit DVD VCR

DF-H7DD3D-FB-I(GB) 2007.7.25 2:53 PM ˘ ` 46 mac001 1200DPI 100LPI

Basic Recording

Checking the Recording Time		One Touch Copy - DVD to VHS

Total time and recorded time are displayed on the TV screen after pressing [DISPLAY].

To Pause the Recording

1Press [PLAY/PAUSE] to pause the disc or tape during recording.

2When you want to continue recording, press [PLAY/PAUSE] or [REC] in DVD mode and press [REC] in VCR mode.

Note

¥To quit One Touch Recording, press [STOP]. To confirm, select ÔOKÕ. To cancel, select ÔCancelÕ.

¥The DVD Recorder+VCR will automatically power off when One Touch Recording ends.

Tip (VCR mode only)

¥Always use [PLAY/PAUSE] for best results when making changes during recording. For example: To change channels during recording, first press [PLAY/PAUSE] to put the unit in Pause mode. Then select the desired channel on the DVD Recorder+VCR, and press [REC] again to resume recording.

¥You cannot record on the VCR deck and DVD deck at the same time.

¥While the VCR is recording, DVD playback is impossible. And, while the DVD is recording, all VCR functions are disabled.

If the DVD you are attempting to copy is copy- protected, you will not be able to copy the disc. It is not permitted to copy Macrovision encoded DVDs.

1Insert a Disc.

Insert the disc you wish to copy in the DVD deck and close the disc tray.

2Insert a VHS Tape.

Insert a blank VHS videotape into the VCR deck.

3Find the place on the DVD disc tape from which you want to start recording using the [PLAY/PAUSE], [FF] and [REW] functions. And press [STOP].

4Press [VCR ÏÏDVD] on the front panel.

5Press [ENTER] to select the desired Record Mode in ÔCopy to TapeÕ menu:

¥SP (Standard Play)

¥LP (Long Play, 2 times SP).

Copy to Tape

Choose quality and press COPY key

■ Exit

6Press [VCR ÏÏDVD] again to start copying.

7 Stop the Copy Process

To stop copying at any time, press [STOP]. You must stop the Copy process manually when the DVD movie ends, or the unit may replay and record over and over again.

If you want to start copy any point of disc

1.Find the place on the DVD (or Disc) from which you want to start recording using the [PLAY/PAUSE], [REW] and [FF] functions.

2.Press [COPY] while DVD is in resume stop (È STOP) mode.

3.Follow the same procedure 5-7.

Copy Edit (DVD ➝VCR)

During one touch copy you can search or change REC

SPEED and resume copy.

1 During One Touch Copy, press [PLAY/PAUSE] to enter COPY EDIT mode.