Additional playback features | Additional playback features |
|
|
Search by time
Using this feature you can select where playback should start (select elapsed time).
1During playback press [SYSTEM MENU] on the remote control. The menu bar will appear at the top of the screen.
2Select the ' 
' symbol using […] or [†] and confirm with [√]. Playback is stopped and a box appears on the screen showing the elapsed time.
3Enter the start time with the digit keys [0..9] from where playback should start.
4Confirm with [OK].
5Playback starts immediately before the time entered.
The time entered will flash
If the selected title is shorter than the time entered, enter a new time or end the function using [SYSTEM MENU].
Repeat/Shuffle play
You can mark entire sections or the whole disc for endless playback. Depending on the type of disc (DVD video, DVD+RW, video CD) you can select a chapter, title or the entire disc.
1Select the desired chapter, title or the entire disc and start playback.
2During playback, press [PLAY MODE]. By pressing [PLAY MODE] again you can chose from the following options:
chapter | : repeat chapter – DVD only | |
title | : repeat title/track | |
repeat | ||
: repeat entire disc (Video CD, Audio CD only) | ||
shuffle | ||
: Shuffle play | ||
|
display disappears: no repeat
3To switch off the repeat, press [STOP]. You can also press [PLAY MODE] repeatedly until the icons disappear.
Scan feature
This feature plays back the first 10 seconds of each chapter (DVD) or track (CD).
1 During playback, press [PLAY MODE]. Select ' scan ' using [PLAY MODE].
2After 10 seconds the DVD recorder switches to the next chapter/index. To start playback at the corresponding chapter/index, press [STOP] and then [PLAY/PAUSE].
Zoom feature
The Zoom feature allows you to enlarge the video image and pan through the enlarged image.
1 | Press [ | ] and select the required zoom factor using [œ] or [√]. |
| |
2 | When 'OK to pan' appears on the screen, the zoom process is complete. | PLAYBACK | ||
3 | Press [OK]. Using [œ √ … †], select the part of the image you wish to | |||
| ||||
| view. |
|
| |
4 | Confirm with [OK]. |
| ||
5 | To stop the feature, press [PLAY/PAUSE] and then [SYSTEM MENU]. |
| ||
| ||||
Camera angle
If a DVD video contains sequences recorded from different camera angles you can change the camera angle for playback.
1During playback, press [ 
].
2Select the required camera angle using […] or [†]. You can also enter the number directly using the number buttons [0..9].
3After a short delay, playback changes to the new camera angle. The
' 
' icon remains displayed until multiple angles are no longer available.
The ' 
' icon is not visible
The selected scene was not recorded from different camera angles. That is why you cannot select this feature. For more information please read the ‘cover text’ on your DVD video disc.
30 |
|
|
| 31 |
|
|