Managing the disc contents
Erasing chapter markers
You can erase all or some of the markers within a title .
1During playback of the appropriate chapter press [EDIT] on the remote control. The 'Edit Menu' menu will appear on the screen.
2Using [†] select 'Delete chapter marker' for this chapter or 'Delete all markers' for all chapters within the selected title.
3Confirm with [OK].
4To end, press [EDIT].
How do I select other chapters?
1Press [T/C ] on the remote control. The title and chapters are shown at the top of the screen.
2Using […] or [†] select Title (T) or Chapter (C).
3Using [œ] or [√] select the title or chapter you wish to edit.
Programmingi a recordingrding (TIMER)(TIMER)
General information
Use programmed recording (TIMER) to automatically start and stop a recording at a later date. The DVD recorder will switch to the right program number and begin recording at the correct time. With this DVD recorder, you can
To make a programmed recording, your DVD recorder needs to know:
*the date you want to make the recording
*the program number of the TV channel
*the start and stop time of the recording
*VPS or PDC on or off
*the recording mode ('HQ/SP/SP+/LP/EP/EP+'). This information is saved in a TIMER block.
What is 'VPS/PDC'?
'VPS' (Video Programming System)/ 'PDC'(Programme Delivery Control) are used to control the start and duration of TV channel recordings. If a TV programme starts earlier or ends later, the DVD recorder will still switch itself on and off at the correct times.
What do I need to know about 'VPS/PDC'?
You must enter the start time exactly to the minute .
If you want to programme a time that is different from the VPS or PDC time, you must switch off VPS or PDC.
Only one TV programme on a TV channel can be controlled using 'VPS/PDC' at a time. If you want to record two or more TV programmes on a TV channel using 'VPS/PDC', you will need to programme these as two separate recordings.
RECORDING
46 |
|
|
| 47 |
|
|