Daewoo DQR-1000D ‘Off in the Digital output menu, From the following settings, All, PCM only

User preferences

User preferences

Sound settings

				Depending on which audio outputs are used, you can select the settings in
			Sound	this menu.
				If you only use the analogue audio output ( AUDIO L/R ), select the settings
--	Digital output	√All
				‘Off' in the 'Digital output' menu.
	Analogue output	Stereo
----	Night mode	Off		Digital output
				For devices connected to the DIGITAL AUDIO OUT socket, you can select
				from the following settings.
				All :	Dolby Digital and DTS signals are fed unaltered to the digital
					output. MPEG-2 multi-channel signals are converted to PCM
					(Pulse Code Modulation). For receivers/amplifiers with digital
					multi channel sound decoders.
				PCM only :	Dolby Digital and MPEG-2 multi-channel signals are converted
					to PCM (Pulse Code Modulation). For receivers/amplifiers
					without digital multi channel sound decoders.
				Off :	Digital output switched off. For devices with analogue audio
					input.
				Analogue output
				For devices connected to the analogue audio output (AUDIO L/R), you can
				select from the following settings.
				Stereo :	For devices without Dolby Surround or Tru Surround. Use this
					setting if the DVD recorder is only connected to a stereo TV set.
				Surround :	Dolby Digital and MPEG-2 multi-channel are mixed down to a
					DOLBY surround-compatible two-channel output signal. For
					devices with Dolby Surround Pro Logic decoder.

Night mode

Night mode optimises the sound for playback at low volume. You are therefore less likely to disturb your neighbours. This only works for Dolby Digital audio on DVD video discs.

Language settings

		Language
--	Playback audio √English
	Subtitle	English
----	Menu	English
	Country	United Kingdom

Additional settings

		Features
--	Access control	√Enter code..
	Status box	On
----	Auto resume	On
	Low power standby	Off

You can choose the following settings in this menu:

Audio Language

Playback audio language

Subtitle

Subtitle language

Menu

Screen menu language

Country

Country

You can select the following functions in this menu:

Access control

Please read the next chapter 'Access control'.

Status box

Along with the on screen menu, the OSD (On Screen Display) also displays information on the current operating status (counter, playback, recording, TV channel, etc.) on the TV screen. You can switch off the information about the operating status so that the on screen display (OSD) is not recorded during copying.

On: The OSD information appears in every selected mode for a few seconds and disappears again.

Off : The OSD information is switched off. It is no longer displayed on the screen.

Auto resume

If playback of a pre-recorded DVD video disc or video CD is interrupted (button [STOP] or [OPEN/CLOSE] ) when the disc is reloaded (disc is started) playback starts at the precise location where it stopped. This applies not only to the current disc but to the last 20 discs played.

This feature can be switched off if not required.

Low power standby

To save power, you can switch off the clock display on the DVD recorder. Programmed (TIMER) recordings will still take place.

On : If the DVD-Recorder is switched off (button [STANDBY]), the clock display is also switched off.

Off : If the DVD-Recorder is switched off (button [STANDBY]), the clock display is visible.

SETUP

52 53