Daewoo DQR-1000D, DQR-1100D Quality is automatically transferred from the current title

Manual recording

Protecting the disc against accidental recording

To prevent an important recording from being accidentally erased, you can protect the entire disc. You can only protect the disc as a whole. It is not possible to protect an individual recording.

Manual recording

Lining up recordings within a title (assemble cut)

You can add further recordings to a title already contained on a DVD+RW disc. This recording will be added to the title as a so-called 'chapter'. Existing information will be overwritten from this location onward. Depending on the length of the recording, this will also overwrite titles that follow the current title. The recording mode

Setting for DAEWOO DVD+RW

DIsc name	DAEWOO DVDRW
Protection	œUnprotected
Erase disc	Protected

1Insert the disc you wish to protect.

2Press [DISC MENU]. The Index Picture Screen appears.

3While the Index Picture Screen is displayed, press the [STOP] button on the remote control. The first title is marked.

4Press […]. This takes you to the disc info screen.

5Press the [√] button. Select 'Protection'. Confirm with [√].

6Select 'Protected' using [†] and confirm with [OK].

7Quit using [œ] and then [DISC MENU].

The entire disc is now protected. If you try to record onto this disc the message 'LOCK' will appear in the display and 'Disc locked' on the screen.

What happens with DVD+R discs?

As long as these discs are not finalised, they can be protected against accidental erasure in the same way as DVD+RW discs.

(quality) is automatically transferred from the current title.

To play back this recording, press [SYSTEM MENU] and select 'C' (chapter) using [√]. You can also use [T/C].

For more information, read section 'Changing to a different title/chapter' in chapter 'Playback'.

1Find the title in the Index Picture Screen where you want to insert the

new recording.

2Look at the last minute of the old recording (playback).

3Press [PLAY/PAUSE] on the remote control at the position where the new recording is to go.

4To monitor the recording you can switch to the internal tuner using [OUTPUT].

5 Now start recording as usual by pressing [REC/OTR] on the remote control. The new recording will be inserted.

6Stop recording with [STOP].

What happens with DVD+R discs?

New recordings on 'DVD+R' discs can only be added after existing recordings. It is not possible to overwrite existing recordings on 'DVD+R' discs.

RECORDING

36 37