Daewoo DF-4501P user manual VCR Playbackl, To return to normal playback, press Play

Page 21

VCR Playbackl

Before You Begin

1Press the [VCR] button to set the remote control to operate the VCR deck.

2Turn the TV on and select the video input source connected to the DVD Recorder+VCR.

Audio system: Turn the audio system on and select the input source connected to the DVD Recorder+VCR.

Playing a VHS Tape

1Insert a prerecorded video cassette.

If the DVD Recorder+VCR is powered off, it will power on automatically.

Make sure the TIMER indicator on the front panel display is not lit. If it is, press [POWER] once.

If a tape without a safety tab is inserted, the DVD Recorder+VCR will start playback automatically.

If the DVD Recorder+VCR is powered on by inserting a video cassette, playback will not start automatically.

2Press [PLAY].

The PLAY icon appears on the TV screen. It is not necessary to select the tape speed (SP, LP) for playback. It will be automatically selected by the DVD Recorder+VCR.

3Press [STOP] to stop playback.

The STOP icon appears on the TV screen. If the tape reaches the end before [STOP] is pressed, the DVD Recorder+VCR will automatically stop, rewind, and eject the tape.

Tracking Control

Auto Tracking

The automatic tracking function adjusts the picture to remove snow or streaks. It works in the following cases:

•When a tape is played for the first time.

•When the tape speed (SP, LP) changes.

•When streaks or snow appear because of scratches on the tape.

Manual Tracking

If noise appears on the screen during playback, press the [TRACKING +/-] buttons on the remote control until the noise on the screen is reduced.

•In case of vertical jitter, adjust these controls very carefully.

•Tracking is automatically reset to normal when the tape is ejected or the power cord is unplugged for more than 3 seconds.

VCR Playback

Special Playback Features

Notes on special playback features

Horizontal lines (noise bars) will appear on the TV screen. This is normal.

The audio is automatically muted during special playback modes, so there is no sound during search, slow motion, etc. During high-speed picture search, a short time is needed to stabilize tape speed when re-entering Play mode. Slight interference may be observed during this time.

Fast Forward/Backward

This function lets you visually search forward and backward for a desired scene on your tape.

1Press [REW] or [FF] during playback. Search mode will be activated.

If the DVD Recorder+VCR is left in Search mode for more than 3 minutes, the DVD Recorder+VCR will automatically resume Play mode to protect the tape and video heads.

2To return to normal playback, press [PLAY].

Still Picture

 

1

Press [PLAY/PAUSE] during playback.

 

 

A still picture appears on the TV screen.

 

 

If a still picture vibrates vertically, stabilize it by using the [TRACKING +/-] buttons on the remote control.

 

 

If the DVD Recorder+VCR is left in Still mode for more than 5 minutes, the DVD Recorder+VCR will

PLAYBACK

2

automatically enter Stop mode to protect the tape and video heads.

 

To return to normal playback, press [PLAY].

 

Slow Motion

1Press [SLOW+] for Slow Motion playback.

2Press [SLOW+] and [SLOW-] repeatedly to adjust the Slow Motion playback speed.

Counter Memory Function

This is useful if there is a section of tape you want to view immediately after recording or if you want to return to the same point several times.

1Begin recording or playing a tape.

2At the point you want to locate later, reset the real-time counter to 0:00:00 by pressing [CLEAR]. Continue to play or record.

3Press [STOP] when recording or playback finishes.

4You can make the tape automatically stop when the counter returns to about ‘0:00:00‘ by selecting "Go-to- Zero" function under ‘SETUP’ ➝ ’Preferences’ ➝ ’VCR’. See page 27.

34

 

 

 

35

 

 

Page 20 Page 22
Image 21
Page 20 Page 22
Contents DVD Recorder + VCR Alcohol- based cleaning agents Safetyty InstructionsI t tiPrecautions For your own SafetyUnit leave all servicing to qualified service personnel ImportantI t t SafeguardsAvoid direct exposure to beam All operating and use instructions should be followedTable of Contents Number of this player, the disc cannot be played OverviewiTo keep the surface clean To clean the cabinetSurface of the unit To obtain a clear picture Nearest dealerIdentification of Controls OTR Recording mode Standby modeRecording Pause mode Selects VCR mode Selects DVD modeRecover from system down Plug into a power outletConnect to a TV or other equipment with audio inputs Connect to a TV with Component Video Y Pb Pr inputsCH52 ConnectionsiCorresponding scart socket at the back of a Satellite decoder or set top boxConnecting an Amplifier/Receiver Connecting Optional EquipmentConnecting a Digital Camcorder DV model only Initial Setup Initial InstallationGo to page 17~28 Go to page 47~49 Go to page 50~52 Go to page 42~44Enter the date and time Follow the same procedure as the ‘DVD Record Quality’ Press SETUP. The Setup menu appearsSelect the PR number you want to edit using …/† ‘Recording Options’ SettingsDisplays Follow the same procedure as the OSD LanguageUse œ and √ to select ‘Language Press √. The ‘Video‘ submenu is displayedWhile ‘Preferences No signal will be output from the Digital Audio Out jacksPress √. The ‘Audio‘ submenu is displayed Use …/† to select the desired digital output typeConfirm, press Enter Password then press EnterUse …/† to select ‘VCR‘ Press Enter to display the submenuOn-Screen Displayi l Overviewverview DVD Playback You can change the TV audio using the Audio buttonTrack Interval won’t be displayed in PBC on mode ConfirmZoom function may not work on some DVDs To return to normal playback, press Play VCR PlaybacklOther Disci Playbackl Prepare a CD which includes both MP3 and Jpeg filesInsert the CD and play an MP3 file DVD Recorder can play DivX files on CD-R/RW Basicic RecordingiFollow the instructions below to record a TV program Make sure your TV input is set to view the DVD Recorder+VCRInsert a blank VHS videotape into the VCR deck Insert the VHS videotape you wish to copy into the VCR deckTo stop copying at any time, press Stop During one touch copy you can search and resume copy‘Timer Recording’ menu appears Timer RecordingTimer Recording using Manual Set Record Screen Timer Recording using ShowView VideoPlus systemYou should set only one Timer Recording Only one Timer recording will workRecording from an Externalxternal InputInput Disc Initialize Disc OperationDisc Operation in DVD±RW disc Erase the disc DVD±RWUse …/† to select ‘Adapt’ menu Use …/† to select ‘Finalize’ menuIf you want to adapt the whole disc, press Enter Press …/† to select ‘Disc Info’Disc Edit Select ‘Label’ using … †Press Enter to change the title name Character or function and press EnterTroubleshooting No solution Made compatible if using aFinalized disc Discs recorded with copy-once No solution Your TV’s tuner Timer Recording notTechnicali l Specificationsi i ti
Top Page Image Contents