Daewoo DF-4501P Disc Initialize, Disc Operation in DVD±RW disc, Erase the disc DVD±RW

Page 27

Recording from an External Input

What is DV? DV model only

Using DV, also known as i.LINK, you can connect a DV-equipped camcorder to the DVD Recorder+VCR using a single DV cable for input and output of audio, video, data and control signals.

The i.LINK interface is also known as IEEE 1394-1995. “i.LINK” and the “i.LINK” logo are trademarks.

•The DVD Recorder+VCR is only compatible with DV-format (DVC-SD) camcorders. Digital satellite tuners and Digital VHS video recorders are not compatible.

•You cannot connect more than one DV camcorder at a time to the DVD Recorder+VCR.

•You cannot control the DVD Recorder+VCR from external equipment connected via the DV IN jack (including two DVD Recorders).

•It may not always be possible to control the connected camcorder via the DV IN jack.

•Audio input to the DV IN jack should be 32 or 48kHz (not 44.1kHz).

•Picture disturbance on the recording may occur if the source component pauses playback or plays an unrecorded section of tape, or if the power fails in the source component, or if the DV cable becomes disconnected.

Disc Operation

Disc Initialize

•If you load a blank DVD±R (±RW) disc, it will be initialized (formatted to enable recording).

•Do not start recording until disc initialization is complete.

•If you load a DVD±RW that has already been used you can record a program immediately.

Disc Operation in DVD±RW disc

For recordable DVD media, such as DVD±R and DVD±RW discs, you can manage the disc using the Disc Menu.

The DVD±RW Disc Menu allows you to erase, lock, or unlock your disc. You can also make it compatible with most other DVD players.

At first, go to Disc Operation mode.

1Press [SETUP]. The Setup menu appears.

2While ‘Disc Oper‘ is selected, press [ENTER] to go to the Disc Operation page.

Erase the disc (DVD±RW)

3Use […/†] to select the ‘Erase’ menu.

4If you want to erase the whole disc, press [ENTER].

5To confirm, select ‘OK‘. To cancel, select ‘Cancel‘.

If you select ‘OK‘ and press [ENTER], all the contents of the disc will be lost.

DVD Recorder

Init Setup ➞

Disc Operation

œ√ Select

Init Setup

Disc Oper

Disc Edit

Timer REC

Erase

 

 

Finalize

 

 

Protect

Disc Operation

Make Comp

…†

Select

Adapt

ENTER

OK

Disc Info

DISC

Exit

_ Exit

 

 

RECORDING

Erase

Erase this disc?

OKCancel

Protect Disc (DVD±R, DVD±RW)

If you want to protect a disc from accidental recording, editing, or erasing, you can lock the disc. Later, if you change your mind, you can unprotect the disc.

3Use […/†] to select ‘Protect’ menu.

4If you want to protect the whole disc, press [ENTER].

Erase

Finalize

Protect

Make Comp

Adapt

Disc Info

_ Exit

Disc Operation

…† Select

ENTER OK

DISC Exit

EDITING

5To confirm, select ‘OK‘. To cancel, select ‘Cancel‘.

If you select ‘OK‘ and press [ENTER], all the contents of the disc will be protected.

Protect

Protect this disc?

OKCancel

46

 

 

 

47

 

 

Page 26 Page 28
Image 27
Page 26 Page 28
Contents DVD Recorder + VCR For your own Safety Safetyty InstructionsI t tiAlcohol- based cleaning agents PrecautionsAll operating and use instructions should be followed ImportantI t t SafeguardsUnit leave all servicing to qualified service personnel Avoid direct exposure to beamTable of Contents Number of this player, the disc cannot be played OverviewiNearest dealer To clean the cabinetTo keep the surface clean Surface of the unit To obtain a clear pictureIdentification of Controls Selects VCR mode Selects DVD mode Standby modeOTR Recording mode Recording Pause modeConnect to a TV with Component Video Y Pb Pr inputs Plug into a power outletRecover from system down Connect to a TV or other equipment with audio inputsSatellite decoder or set top box ConnectionsiCH52 Corresponding scart socket at the back of aConnecting an Amplifier/Receiver Connecting Optional EquipmentConnecting a Digital Camcorder DV model only Go to page 50~52 Go to page 42~44 Initial InstallationInitial Setup Go to page 17~28 Go to page 47~49Enter the date and time ‘Recording Options’ Settings Press SETUP. The Setup menu appearsFollow the same procedure as the ‘DVD Record Quality’ Select the PR number you want to edit using …/†Press √. The ‘Video‘ submenu is displayed Follow the same procedure as the OSD LanguageDisplays Use œ and √ to select ‘LanguageUse …/† to select the desired digital output type No signal will be output from the Digital Audio Out jacksWhile ‘Preferences Press √. The ‘Audio‘ submenu is displayedPress Enter to display the submenu Password then press EnterConfirm, press Enter Use …/† to select ‘VCR‘On-Screen Displayi l Overviewverview DVD Playback You can change the TV audio using the Audio buttonTrack Interval won’t be displayed in PBC on mode ConfirmZoom function may not work on some DVDs To return to normal playback, press Play VCR PlaybacklOther Disci Playbackl Prepare a CD which includes both MP3 and Jpeg filesInsert the CD and play an MP3 file Make sure your TV input is set to view the DVD Recorder+VCR Basicic RecordingiDVD Recorder can play DivX files on CD-R/RW Follow the instructions below to record a TV programDuring one touch copy you can search and resume copy Insert the VHS videotape you wish to copy into the VCR deckInsert a blank VHS videotape into the VCR deck To stop copying at any time, press StopTimer Recording using ShowView VideoPlus system Timer Recording‘Timer Recording’ menu appears Timer Recording using Manual Set Record ScreenYou should set only one Timer Recording Only one Timer recording will workRecording from an Externalxternal InputInput Erase the disc DVD±RW Disc OperationDisc Initialize Disc Operation in DVD±RW discPress …/† to select ‘Disc Info’ Use …/† to select ‘Finalize’ menuUse …/† to select ‘Adapt’ menu If you want to adapt the whole disc, press EnterCharacter or function and press Enter Select ‘Label’ using … †Disc Edit Press Enter to change the title nameTroubleshooting Your TV’s tuner Timer Recording not Made compatible if using aNo solution Finalized disc Discs recorded with copy-once No solutionTechnicali l Specificationsi i ti
Top Page Image Contents