Daewoo DF-4501P user manual Insert the VHS videotape you wish to copy into the VCR deck

Page 24

Basic Recording

Basic Recording

 

 

Checking the Recording Time

Total time and recorded time are displayed on the TV screen after pressing [DISPLAY]. Recorded time is displayed on the front panel display.

To Pause the Recording

1Press [PLAY/PAUSE] to pause the disc or tape during recording.

2When you want to continue recording, press [PLAY/PAUSE] or [REC (●)] in DVD mode and press [REC (●)] in VCR mode.

Note

•To quit One Touch Recording, press and hold [STOP] for 3 seconds.

•The DVD Recorder+VCR will automatically power off when One Touch Recording ends.

Tip (VCR mode only)

•Always use [PLAY/PAUSE] for best results when making changes during recording.

For example: To change channels during recording, first press [PLAY/PAUSE] to put the unit in Pause mode. Then select the desired channel on the DVD Recorder+VCR, and press [REC (●)] again to resume recording.

•You cannot record on the VCR deck and DVD deck at the same time.

•While the VCR is recording, DVD playback is possible. However, while the DVD is recording, all VCR functions are disabled.

Copy Edit (DVD ➝ VCR)

During one touch copy you can search or change REC SPEED and resume copy.

1During One Touch Copy, press [PLAY/PAUSE] to enter COPY EDIT mode.

2Search with [FF/REW] or [NEXT/PREV] button.

3Press [VCR œœ DVD] and you can change REC SPEED.

4Press [VCR œœ DVD] again to resume copy.

One Touch Copy - VHS to DVD

You can copy the contents of a VHS tape to a DVD±R or DVD±RW. This allows you to archive your old VHS tapes to DVD.

If the VHS videotape you are attempting to copy is copy-protected, you will not be able to copy the tape. It is not permitted to copy Macrovision encoded tapes.

1Insert a VHS Tape.

Insert the VHS videotape you wish to copy into the VCR deck.

2Insert a DVD±R or DVD±RW disc.

Insert a blank DVD±R or DVD±RW disc in the DVD deck and close the disc tray.

One Touch Copy - DVD to VHS

Copy to Tape

When using a DVD+RW disc, you must initialize before copying; see page 47.

3Find the place on the VHS tape from which you want to start recording using the [PLAY/PAUSE], [FF] and [REW] functions. And press [STOP].

If the DVD you are attempting to copy is copy-protected, you will not be able to copy the disc. It is not permitted to copy Macrovision encoded DVDs.

1Insert a Disc.

Insert the disc you wish to copy in the DVD deck and close the disc tray.

2Insert a VHS Tape.

Insert a blank VHS videotape into the VCR deck.

Choose quality and press COPY key:

LP

SP

■Stop

4

Press [VCR √√ DVD] on the front panel.

5

Press [ENTER] to select the desired Record Mode in ‘Copy to Disc’ menu:

 

• HQ (High Quality - 1 hr/disc)

 

• SP (Standard Play - 2 hrs/disc)

 

• EP (Extended Play - 4 hrs/disc)

Copy to Disc

Choose quality and press COPY key:

HQ

SP

EP

SEP

RECORDING

3

Find the place on the DVD disc tape from which you want to start recording using the [PLAY/PAUSE], [FF] and

 

[REW] functions. And press [STOP].

4

Press [VCR œœ DVD] on the front panel.

 

• SEP (Very Low Quality - 8 hrs/disc)

6

Press [VCR √√ DVD] again to start copying.

7

Stop the Copy Process

■Stop

5

Press [ENTER] to select the desired Record Mode in ‘Copy to Tape’ menu:

 

• SP (Standard Play)

6

• LP (Long Play, 2 times SP).

Press [VCR œœ DVD] again to start copying.

7

Stop the Copy Process

To stop copying at any time, press [STOP]. You must stop the Copy process manually when the DVD movie ends, or the unit may replay and record over and over again.

If you want to start copy any point of disc

1.Find the place on the DVD (or Disc) from which you want to start recording using the [PLAY/PAUSE], [REW] and [FF] functions.

2.Press [COPY] while DVD is in pause mode or in resume stop (» STOP) mode.

3.Follow the same procedure 5-7.

To stop copying at any time, press [STOP].

Copying will stop automatically when the VHS tape ends.

Copy Edit (VCR ➝ DVD)

During one touch copy you can search and resume copy.

1Press [PLAY/PAUSE] to enter COPY EDIT mode.

2Press [PLAY/PAUSE] again to playback.

3Search with [FF/REW] button.

4Press [VCR √√ DVD] to resume copy.

40

 

 

 

41

 

 

Page 23 Page 25
Image 24
Page 23 Page 25
Contents DVD Recorder + VCR Safetyty InstructionsI t ti Alcohol- based cleaning agentsPrecautions For your own SafetyImportantI t t Safeguards Unit leave all servicing to qualified service personnelAvoid direct exposure to beam All operating and use instructions should be followedTable of Contents Overviewi Number of this player, the disc cannot be playedTo clean the cabinet To keep the surface cleanSurface of the unit To obtain a clear picture Nearest dealerIdentification of Controls Standby mode OTR Recording modeRecording Pause mode Selects VCR mode Selects DVD modePlug into a power outlet Recover from system downConnect to a TV or other equipment with audio inputs Connect to a TV with Component Video Y Pb Pr inputsConnectionsi CH52Corresponding scart socket at the back of a Satellite decoder or set top boxConnecting an Amplifier/Receiver Connecting Optional EquipmentConnecting a Digital Camcorder DV model only Initial Installation Initial SetupGo to page 17~28 Go to page 47~49 Go to page 50~52 Go to page 42~44Enter the date and time Press SETUP. The Setup menu appears Follow the same procedure as the ‘DVD Record Quality’Select the PR number you want to edit using …/† ‘Recording Options’ SettingsFollow the same procedure as the OSD Language DisplaysUse œ and √ to select ‘Language Press √. The ‘Video‘ submenu is displayedNo signal will be output from the Digital Audio Out jacks While ‘PreferencesPress √. The ‘Audio‘ submenu is displayed Use …/† to select the desired digital output typePassword then press Enter Confirm, press EnterUse …/† to select ‘VCR‘ Press Enter to display the submenuOn-Screen Displayi l Overviewverview You can change the TV audio using the Audio button DVD PlaybackTrack Interval won’t be displayed in PBC on mode ConfirmZoom function may not work on some DVDs VCR Playbackl To return to normal playback, press PlayOther Disci Playbackl Prepare a CD which includes both MP3 and Jpeg filesInsert the CD and play an MP3 file Basicic Recordingi DVD Recorder can play DivX files on CD-R/RWFollow the instructions below to record a TV program Make sure your TV input is set to view the DVD Recorder+VCRInsert the VHS videotape you wish to copy into the VCR deck Insert a blank VHS videotape into the VCR deckTo stop copying at any time, press Stop During one touch copy you can search and resume copyTimer Recording ‘Timer Recording’ menu appearsTimer Recording using Manual Set Record Screen Timer Recording using ShowView VideoPlus systemYou should set only one Timer Recording Only one Timer recording will workRecording from an Externalxternal InputInput Disc Operation Disc InitializeDisc Operation in DVD±RW disc Erase the disc DVD±RWUse …/† to select ‘Finalize’ menu Use …/† to select ‘Adapt’ menuIf you want to adapt the whole disc, press Enter Press …/† to select ‘Disc Info’Select ‘Label’ using … † Disc EditPress Enter to change the title name Character or function and press EnterTroubleshooting Made compatible if using a No solutionFinalized disc Discs recorded with copy-once No solution Your TV’s tuner Timer Recording notTechnicali l Specificationsi i ti
Top Page Image Contents