Basic Setup
English
Basic Setup: Installing MyDVR on PC
Your DVR comes with powerful remote access and interface software, called MyDVR. You can setup and configure almost all aspects of the DVR from the MyDVR interface.
The MyDVR software will allow you to:
•view images from your DVR in
•playback recorded footage
•copy footage to your local PC and
•adjust settings and configure the DVR
In fact, the MyDVR software is so powerful; you don’t even need to connect a monitor to the DVR if there’s a computer on the local network that you’re running MyDVR on.
For quick and easy configuration of the DVR’s settings, recording quality and schedule, we suggest using the remote interface in MyDVR.
How to install MyDVR:
•Insert the included CD into your computer.
•Locate the file called MyDVR.exe and run this file. You may be asked by UAC (User Account Control) to allow MyDVR to “make changes” to your system. Select Allow or Continue.
•You’ll see an installation wizard. Simply follow the prompts to install the software.
•Once the MyDVR software has been installed, it should automatically detect your DVR on your network.
Minimum PC Requirements:
2.0GHz or faster CPU | |
1GB or more RAM | (2GB recommended) |
10/100Mbps Network | (1000Mbps recommended) |
Internet connection | (512kbps+ recommended) |
1024x768 resolution | (1280x720 recommended) |
Supported Operating Systems
Microsoft Windows XP, Microsoft Windows Vista, Microsoft
Windows 7 and Microsoft Windows 8
NOTE: Windows XP, Windows Vista, Windows 7 and Windows 8
are registered trademarks of Microsoft Corporation.
Got a Mac?
Check out
www.swann.com/mydvrmac
for the latest
access software.
16