English
Front Panel of the DVR
Connecting the DVR
1 2 3
1)Infrared Sensor: Monitors signals coming from the infra- red remote control. If this sensor is blocked or obstructed, then the functionality of the remote will be impaired.
2)Hard Drive Indicator: Lights up when the hard drive is active. It will flash rapidly when recording or searching (in time with the read/write cycles).
3)Power Indicator: This LED is illuminated when the DVR is connected to power and switched on.
1)Infrared Sensor: Monitors signals coming from the infra- red remote control. If this sensor is blocked or obstructed, then the functionality of the remote will be impaired.
2)Power Indicator: This LED is illuminated when the DVR is connected to power and switched on.
1 | 2 3 | 4 |
3)Hard Drive Indicator: Lights up when the hard drive is active. It will flash rapidly when recording or searching (in time with the read/write cycles).
4)USB 2.0 Port: For connecting USB external storage to the DVR for backup, or for applying new firmware.
4
1 | 2 | 3 |
1)USB 2.0 Port: For connecting USB external storage to the DVR for backup, or for applying new firmware.
2)Power Indicator: This LED is illuminated when the DVR is connected to power and switched on.
3)Hard Drive Indicator: Lights up when the hard drive is active. It will flash rapidly when recording or searching (in time with the read/write cycles).
4)Infrared Sensor: Monitors signals coming from the infra- red remote control. If this sensor is blocked or obstructed, then the functionality of the remote will be impaired.
6