English
Device: PTZ (see page 48)
Channel: The channel you’d like to configure a PTZ camera for.
Settings: See page 48 for more information about the PTZ settings you’ll find here.
You’ll probably need the documentation that came with your PTZ camera to figure out how to fill out this configuration page.
System: General (see page 50)
System Standard: Changes between PAL or NTSC standards.
NTSC operates at 30 frames per second, and has an effective resolution of 720 x 480. It’s used in countries with 60Hz power, such as the United States, Canada, Japan and so on.
PAL operates at 25 frames per second, and has an effective resolution of 720 x 576. It’s used in countries with 50Hz power, such as most of Europe, the United Kingdom and Australia.
If this is not set correctly, images on your DVR may be black and white, flickering or simply not there at all.
If you change the System Standard, it automatically forces a reboot of the DVR. This will happen the instant you click OK.
Date Format: How you’d like the date displayed.
Device ID: A code differentiating this DVR from other DVRs or
Basic Setup
23