Magnavox ZV450MW8A owner manual Select the channel number to add or delete, Press Setup to exit

CHANNEL SETTING

ANALOG

5Select the channel number to add or delete.

•Use [CHANNEL / ] to cycle through only the memorized channels.

•Use [{ / B] to cycle through all the channels including the ones not memorized.

•Use [the Number buttons] to select a channel directly.

•When a memorized channel is selected, “Add” is checked and highlighted as a default.

•When an unmemorized channel is selected “Delete” is checked and highlighted as a default.

6Use [K / L] to select “Add” or “Delete”, then press [OK].

Manual Channel Preset

CH 2

Add

Delete

Your setting will be activated and it will automatically switch to the next channel so that you can continue adding or deleting channels.

7Press [SETUP] to exit.

DIGITAL

5Select the channel number to delete.

•Only the major channel is displayed in “Manual Channel Preset” menu. (The channel number displayed in the parenthesis is a virtual channel number)

•Use [CHANNEL / ] to cycle through only the memorized channels.

•You cannot use [{ / B] for the digital TV channel selection.

•Use [the Number buttons] to select a channel directly.

•When a memorized channel is selected, “Add” is checked and highlighted as a default.

•When an unmemorized channel is selected “Delete” is checked and highlighted as a default.

6Use [K / L] to select “Delete”, then press [OK]. Then select the next channel to delete.

•If the setting is complete, press [RETURN] to activate “Manual Channel Preset”.

Manual Channel Preset

DTV 2 (CH - - - )

Add

Delete

Your setting will be activated.

WARNING:

•For the digital TV channels, you cannot recover the deleted channels once they are deleted unless you perform the auto channel preset again.

7Press [SETUP] to exit.

28 EN