Magnavox ZV450MW8A owner manual Hints for Timer Recording, Priority of Overlapped Settings

Page 44

TIMER RECORDING

Hints for Timer Recording

•If there is a power failure or this unit has been unplugged for more than 30 seconds, the clock setting and all timer programming will be lost.

•If a disc is not inserted, "DVD" on the front panel display flashes and timer recording cannot be performed. In

some cases, will appear momentarily around the start time as the unit attempts to record. Please insert a recordable disc.

•If a cassette tape with a erase-protection tab is not in the cassette compartment or there is no cassette tape in the cassette compartment, “VCR” on the front panel display flashes and timer recording cannot be performed. Please insert a recordable cassette tape.

•If a cassette tape ends during the timer recording, the unit will automatically stop, eject the cassette tape, and turn itself off. To continue recording, insert a recordable tape.

•When all the timer recordings are completed, flashes. Press [TIMER SET] to release the unit from the timer standby mode.

•If both DVD and VCR are timer programmed, you cannot use any functions for either unit during timer standby or timer recording. If you want to use functions other than recording under such condition, cancel timer recording by pressing [TIMER SET] during timer standby or stop recording by pressing [STOP C] / [STOP/EJECT C A] on the front panel of the unit during timer recording.

•To cancel the timer standby mode, press [TIMER SET].

•When the starting and the ending time are the same, the length of the recording will be set for 24 hours. When the disc or cassette tape becomes full during the recording, the unit turns itself off.

•If the starting time is earlier and the ending time is later than the current time, the recording will start right after you press [TIMER SET] at step 9 on page 42.

•You cannot change the audio language for the timer recording of digital TV broadcasting.

•The timer recording cannot be performed in DVD and VCR at the same time. If you set 2 programmings with the same channel and time in both devices, the program which is set first will have the priority.

The Priority of Overlapped Settings

•Timer program which has the earlier start time will be placed first in the timer program list, and be given priority over the programs with the later start time when timer programs overlap.

•When timer programs overlap, the first 2 minutes (at the longest) of the later recording will be cut off.

•When 2 or more timer programs have the same start time, the program set first will be given priority.

•A timer recording of lower priority will be canceled or start from the middle.

•Check the overlapped timer programmings and change the priority if necessary.

When the starting time is the same:

A program set previously (PROG. A) has priority.

PROG. A

PROG. B

actual recording

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

PROG. A

 

 

PROG. B

 

 

 

 

The first 2 minutes (at the longest) will be cut off (when recording to DVD only).

Note for DVD recording

•When the recording time of 2 programs are overlapped, or the end time of a program and the start time of another program is the same, the first 2 minutes (at the longest) of the subsequent program will be cut off.

•If the cut-off portion comes up to 3 minute or more, this program will be displayed with error number E40 in the timer programming list.

When the end time of the programming currently being recorded and the start time of the subsequent program are same:

The beginning of the PROG. B may be cut off.

PROG. A

 

 

PROG. B

 

 

actual

PROG. A

PROG. B

recording

 

 

The first 2 minutes (at the longest) will be cut off.

44 EN

Page 43 Page 45
Image 44
Page 43 Page 45
Contents ZV450MW8A Make your contribution to the environment PrecautionsLaser Safety Important Safeguards PrecautionsInstallation Location Supplied AccessoriesAvoid the Hazards of Electrical Shock and Fire Moisture Condensation WarningMaintenance Servicing Cleaning the cabinetCleaning discs Cleaning the disc lens Disc handlingContents Contents Features Description refers to DVD+RW Description refers to DVD-RW FeaturesSymbol Description 13 12 11 Functional OverviewFront Panel 21 2019 18 11 10 Functional OverviewRear Panel Remote Control Open the cover Insert batteriesClose the cover 2625Confirm button DVD/VCR Analog mode Number buttons Digital modeREW E button DVD/VCR DVD mode VCR modeFront Panel Display Display MessageCurrent status of the unit Displays the followingSupplied cables used in this connection are as follows Refer to Initial Setting onAntenna Cable Connection Plug in the power cords of the devices to the AC outlet RF Modulator ConnectionWith this setup You cannot record one channel while watching another channelConnection to a TV This unitAvailable on DVD only Method Analog audio Good picture Method Better pictureSetting Connection to AN Audio SystemAudio Connection Dolby DigitalProceed to in Initial Setting on Before YOU StartFinding the Viewing Channel on Your TV Turn on your TVDisc Information / Menu Before YOU StartGuide to On-Screen Display / Menu This is an example screen only for explanation Title Name InformationFile Name Information Main Menu Switching DVD / VCR Mode How to Insert a Disc / Cassette TapeHow to Insert a Disc How to Insert a Cassette TapeInitial Setting Setting onChannel Setting When scanning is over, press Setup to exitAuto Channel Scan ScanningChannel Setting Preset, then press OKAdding / Deleting Channels Use K / L to select Channel, then press OKPress Setup to exit Select the channel number to add or deleteSelect the channel number to delete Use K / L to select Add or Delete, then press OKSetting the Clock Auto Clock SettingDaylight Saving Time Setting the ClockManual Clock Setting Channel Selection Tuner SettingsSwitching Analog Mode Digital Mode Tuner Settings Selecting TV AudioSAP secondary audio program Selecting TV Audio cont’dStereo Select if you do not want DTV CC. This is the default Service 1 to ServiceDTV Closed Caption Use K / L to select DTV CC, then press OKUse K / L to select User Setting, then press OK Closed Caption StyleWant to set, then press OK Switch the setting for each item youUse K / L to select the item Recording Mode Information on DVD RecordingRecordable Discs Unrecordable DiscsSetting for Auto Chapter Press Setup and use K / L to select GeneralPress Setup to exit Before RecordingPress REC Mode to select a recording mode Refer to Recording Mode onDesired channel to record Follow the steps to record TV programsPress Stop C to exit the title list Press REC I repeatedly until the desired length appearTimer Recording Press TimerUse K / L to enter the date, then press B Use K / L to select New ProgramPress Timer SET to set a timer programming Timer RecordingUse K / L to select a recording mode To stop the timer recording in progress How to select a channel number for the timer recordingStop C on the remote control is not effective Press Timer SET Check the informationHints for Timer Recording Priority of Overlapped SettingsOverwriting Unnecessary Title Overwriting from the BeginningTitle Overwriting in the Middle of the TitleOverwriting Unnecessary Title Hints for OverwritingOverwrite recording a Existing title B After overwriting Overwrite recording a Existing title B Existing title CSettings for AN External Device Connection to an External DeviceUse K / L to select Video Input, then press OK External deviceSettings for AN External Device Recording from an External DevicePress VCR Recording to a DVDPress DVDBI-DIRECTIONAL Dubbing Use K / L to select Recording, then press OKUse K / L to select Dubbing Mode, then press OK Preparing for dubbing cassette tape to DVDBI-DIRECTIONAL Dubbing Use K / L to select VCR DVD, then press OKPress Stop C to stop the dubbing Use K / L to select DVD VCR, then press OKUse K / L to select Yes, then press OK Setting a Disc to ProtectTo cancel the disc protect Press Setup Use K / L to select Disc Edit, then press OK Finalizing a DiscUse K / L to select Finalize, then press OK Finalizing is completedPlaying the Discs on Other DVD Players Auto FinalizingInformation on Playback Playable Discs and FilesUnplayable Discs Color SystemsCD Playback Mode menu will appear Information on PlaybackPBC playback control for Video CD Hint for DVD PlaybackBasic Playback Direct PlaybackPress Play B to start playback Press Stop C once to stop playback temporarilyBasic Playback Playback from the Title ListUse K / L to select a desired title Use K / L to select Play, thenWhen selecting track/file When selecting the folder Not available for audio CDPlaying Back an Audio CD and a CD-RW/-R with MP3 Files Hints for audio CD tracks and MP3 filesUsing the Title / Disc Menu PauseDuring playback, press Pause F Playback will be paused and sound will be mutedSpecial Playback Resume PlaybackFast Forward / Fast Reverse Playback Skipping TV Commercials During PlaybackSpecial Playback Step by Step PlaybackSlow Forward / Slow Reverse Playback ZoomMarker Setting Repeat PlaybackRandom Playback Program PlaybackUse K / L to select Random Play, then press OK 5Press Play BUsing H / G Using DisplaySearch Title / Chapter SearchAudio CD SearchTime Search For DVD-video Audio soundtrack will switch Switching SubtitlesSwitching Audio Soundtrack Switching Virtual Surround System Switching Camera AnglesSelecting the Format of Audio and Video Reducing Block NoiseInformation on Disc Editing Guide to a Title ListEditing Discs Press DVD, then press TitleEditing Discs Deleting TitlesPress DVD first Press Title Use K / L to select Title Delete, then press OKEditing Discs Putting Names on TitlesUse K / L to select Edit Title After this operation is completed, press Return to exitSetting Chapter Marks Use K / L to select Add, then press OKPress Return twice to exit Submenu will appearClearing Chapter Marks Selected chapter mark will be deletedClearing Chapter Marks cont’d To delete all chapter marksFollow steps 1 to 3 in Deleting Use K / L to select Delete AllHiding Chapters Picture for thumbnail will be set Setting Pictures for ThumbnailsPress Return to exit Dividing a Title You can divide one title into 2 new titlesPutting Name on Disc Setting or Releasing Disc Protect Erasing Disc You can erase all titles on a discMaking Edits Compatible Compatible, then press OKList of Settings ContentsList of Settings ONAPR-OCT OFFSetups PlaybackSetups Parental Lock Default OFFPlayback cont’d YesDisc Menu Language Default English Audio Language Default OriginalSubtitle Language Default OFF Angle Icon Default onFor 4 refer to pages DisplayRefer to 1 to 5 on page 87 and set the selected item OSD Language Default English Screen Saver Default 10 minutesFL Dimmer Default Bright Display cont’dProgressive Scan Default OFF TV Aspect Default 43 Letter BoxVideo Refer to 1 to 2 on this page and setReset All Reset the setting to defaultSelect the recording mode using REC Mode Recording modeVCR Functions To resume playbackOne-touch Timer Recording OTR Press REC I to begin the one-touch timer recordingYou cannot pause the one-touch timer recording VCR FunctionsOther Operations Troubleshooting Symptom RemedyTroubleshooting OPEN/CLOSE a to take out the disc. The disc canceled duringRepairing process MAY not work Press OPEN/CLOSE aFrequently Asked Questions DVD mode only VCR modeREC 3 496 EN Language Code Language CodeGlossary Specifications GeneralRecording TunerEspañol Discos ReproduciblesCódigos de Región Disco GrabableEspañol VHF / UHFPresione STANDBY-ON y Presione OK para activar Ajste Manual de RelojPresione DVD Para seleccionar un modo deGrabación con Temporizador Reproducción Inserte un disco1VMN23648A Customer ServiceTel
Top Page Image Contents