Magnavox ZV450MW8A Maintenance Servicing, Cleaning the cabinet, Cleaning discs, IR signal check

Page 5

PRECAUTIONS

Maintenance

Servicing

•Please refer to relevant topics on “TROUBLESHOOTING” on pages 93-96 before returning the product.

•If this unit becomes inoperative, do not try to correct the problem by yourself. There are no user-serviceable parts inside. Turn off, unplug the power plug and please call our help line mentioned on the front page to locate an Authorized Service Center.

Cleaning the cabinet

•Use a soft cloth slightly moistened with a mild detergent solution. Do not use a solution containing alcohol, spirits, ammonia or abrasive.

Cleaning discs

•When a disc becomes dirty, clean it with a cleaning cloth. Wipe the disc from the center to out. Do not wipe in a circular motion.

•Do not use solvents such as benzine, thinner, commercially available cleaners, detergent, abrasive cleaning agents or antistatic spray intended for analog records.

Cleaning the disc lens

•If this unit still does not perform properly although you refer to the relevant sections and to “TROUBLESHOOTING” in this owner's manual, the laser optical pickup unit may be dirty. Consult your dealer or an Authorized Service Center for inspection and cleaning of the laser optical pickup unit.

Disc handling

•Handle the discs so that fingerprints and dust do not adhere to the surfaces of the discs.

•Always store the disc in its protective case when it is not used.

Auto head cleaning

•Automatically cleans video heads as you insert or remove a cassette, so you can see a clear picture.

•Playback picture may become blurred or interrupted while the TV program reception is clear. Dirt accumulated on the video heads after a long period of use, or the usage of rental or worn tapes can cause this problem. If a streaky or snowy picture appears during playback, the video heads in your unit may need to be cleaned.

© 2007 Funai Electric Co., Ltd.

1.Please visit your local Audio/Video store and purchase a good quality VHS video head cleaner.

2.If a video head cleaner does not solve the problem, please consult your dealer or an Authorized Service Center.

Note

•Remember to read the instructions along with the video head cleaner before use.

•Clean video heads only when problems occur.

IR signal check

If the remote control does not work properly, you can test if the remote control sends out the infrared signal with AM radio or a digital camera (including built-in camera of cellular phone). It will help to define the cause of malfunction.

•With an AM radio:

Tune an AM radio to a station with no broadcasting. Press a button on remote control toward the radio. Sound will be fluttering when you press any key and the radio receives the signal. This means the remote control is working.

• With a digital camera (including built-in camera of cellular phone):

Direct a digital camera to remote control, press and hold a button on remote control. If infrared light appears through digital camera, the remote control is working.

Manufactured under license from Dolby Laboratories. “Dolby” and the double-D symbol are trademarks of Dolby Laboratories.

Dolby Digital Recording

“Dolby® Digital Recording enables consumers to record high-quality video with stereo sound on recordable DVD discs. The technology, when utilized instead of PCM recording, also saves recordable disc space, allow- ing for higher video resolution or extended recording time on each DVD. DVDs created using Dolby Digital Recording will play back on all DVD-video players.” Note: This is true when the players are compatible with actual recordable DVD discs.

Introduction Connections Basic Setup Recording Playback Editing Function Setup VCR Functions

All rights reserved. No part of this manual may be reproduced, copied, transmitted, disseminated, transcribed, downloaded or stored in any storage medium, in any form or for any purpose without the express prior written consent of Funai. Furthermore, any unauthorized commercial distribution of this manual or any revision hereto is strictly prohibited.

Information in this document is subject to change without notice. Funai reserves the right to change the content herein without the obligation to notify any person or organization of such changes.

with the design is a registered trademark of Funai Electric Co., Ltd and may not be used in any way without the express written consent of Funai. All other trademarks used herein remain the exclusive property of their respective owners. Nothing contained in this manual should be construed as granting, by implication or otherwise, any license or right to use any of the trademarks displayed herein. Misuse of any trademarks or any other content in this manual is strictly prohibited. Funai shall aggressively enforce its intellectual property rights to the fullest extent of the law.

EN 5

Others

Español

Page 4 Page 6
Image 5
Page 4 Page 6
Contents ZV450MW8A Make your contribution to the environment PrecautionsLaser Safety Precautions Important SafeguardsSupplied Accessories Installation LocationAvoid the Hazards of Electrical Shock and Fire Moisture Condensation WarningCleaning the cabinet Maintenance ServicingCleaning discs Cleaning the disc lens Disc handlingContents Contents Features Description refers to DVD+RW Description refers to DVD-RW FeaturesSymbol Description 13 12 11 Functional OverviewFront Panel 21 2019 18 11 10 Functional OverviewRear Panel Open the cover Insert batteries Remote ControlClose the cover 2625Number buttons Digital mode Confirm button DVD/VCR Analog modeREW E button DVD/VCR DVD mode VCR modeDisplay Message Front Panel DisplayCurrent status of the unit Displays the followingSupplied cables used in this connection are as follows Refer to Initial Setting onAntenna Cable Connection RF Modulator Connection Plug in the power cords of the devices to the AC outletYou cannot record one channel while watching another channel With this setupThis unit Connection to a TVAvailable on DVD only Method Analog audio Good picture Method Better pictureConnection to AN Audio System SettingAudio Connection Dolby DigitalBefore YOU Start Proceed to in Initial Setting onFinding the Viewing Channel on Your TV Turn on your TVDisc Information / Menu Before YOU StartGuide to On-Screen Display / Menu This is an example screen only for explanation Title Name InformationFile Name Information Main Menu How to Insert a Disc / Cassette Tape Switching DVD / VCR ModeHow to Insert a Disc How to Insert a Cassette TapeSetting on Initial SettingWhen scanning is over, press Setup to exit Channel SettingAuto Channel Scan ScanningPreset, then press OK Channel SettingAdding / Deleting Channels Use K / L to select Channel, then press OKSelect the channel number to add or delete Press Setup to exitSelect the channel number to delete Use K / L to select Add or Delete, then press OKAuto Clock Setting Setting the ClockDaylight Saving Time Setting the ClockManual Clock Setting Channel Selection Tuner SettingsSwitching Analog Mode Digital Mode Selecting TV Audio Tuner SettingsSAP secondary audio program Selecting TV Audio cont’dStereo Service 1 to Service Select if you do not want DTV CC. This is the defaultDTV Closed Caption Use K / L to select DTV CC, then press OKClosed Caption Style Use K / L to select User Setting, then press OKWant to set, then press OK Switch the setting for each item youUse K / L to select the item Information on DVD Recording Recording ModeRecordable Discs Unrecordable DiscsPress Setup and use K / L to select General Setting for Auto ChapterPress Setup to exit Before RecordingRefer to Recording Mode on Press REC Mode to select a recording modeDesired channel to record Follow the steps to record TV programsPress REC I repeatedly until the desired length appear Press Stop C to exit the title listPress Timer Timer RecordingUse K / L to enter the date, then press B Use K / L to select New ProgramPress Timer SET to set a timer programming Timer RecordingUse K / L to select a recording mode How to select a channel number for the timer recording To stop the timer recording in progressStop C on the remote control is not effective Press Timer SET Check the informationPriority of Overlapped Settings Hints for Timer RecordingOverwriting from the Beginning Overwriting Unnecessary TitleTitle Overwriting in the Middle of the TitleHints for Overwriting Overwriting Unnecessary TitleOverwrite recording a Existing title B After overwriting Overwrite recording a Existing title B Existing title CConnection to an External Device Settings for AN External DeviceUse K / L to select Video Input, then press OK External deviceRecording from an External Device Settings for AN External DevicePress VCR Recording to a DVDPress DVDUse K / L to select Recording, then press OK BI-DIRECTIONAL DubbingUse K / L to select Dubbing Mode, then press OK Preparing for dubbing cassette tape to DVDUse K / L to select VCR DVD, then press OK BI-DIRECTIONAL DubbingPress Stop C to stop the dubbing Use K / L to select DVD VCR, then press OKUse K / L to select Yes, then press OK Setting a Disc to ProtectTo cancel the disc protect Finalizing a Disc Press Setup Use K / L to select Disc Edit, then press OKUse K / L to select Finalize, then press OK Finalizing is completedAuto Finalizing Playing the Discs on Other DVD PlayersPlayable Discs and Files Information on PlaybackUnplayable Discs Color SystemsInformation on Playback CD Playback Mode menu will appearPBC playback control for Video CD Hint for DVD PlaybackDirect Playback Basic PlaybackPress Play B to start playback Press Stop C once to stop playback temporarilyPlayback from the Title List Basic PlaybackUse K / L to select a desired title Use K / L to select Play, thenWhen selecting the folder Not available for audio CD When selecting track/filePlaying Back an Audio CD and a CD-RW/-R with MP3 Files Hints for audio CD tracks and MP3 filesPause Using the Title / Disc MenuDuring playback, press Pause F Playback will be paused and sound will be mutedResume Playback Special PlaybackFast Forward / Fast Reverse Playback Skipping TV Commercials During PlaybackStep by Step Playback Special PlaybackSlow Forward / Slow Reverse Playback ZoomRepeat Playback Marker SettingProgram Playback Random PlaybackUse K / L to select Random Play, then press OK 5Press Play BUsing Display Using H / GSearch Title / Chapter SearchAudio CD SearchTime Search For DVD-video Audio soundtrack will switch Switching SubtitlesSwitching Audio Soundtrack Switching Camera Angles Switching Virtual Surround SystemSelecting the Format of Audio and Video Reducing Block NoiseGuide to a Title List Information on Disc EditingEditing Discs Press DVD, then press TitleDeleting Titles Editing DiscsPress DVD first Press Title Use K / L to select Title Delete, then press OKPutting Names on Titles Editing DiscsUse K / L to select Edit Title After this operation is completed, press Return to exitUse K / L to select Add, then press OK Setting Chapter MarksPress Return twice to exit Submenu will appearSelected chapter mark will be deleted Clearing Chapter MarksTo delete all chapter marks Clearing Chapter Marks cont’dFollow steps 1 to 3 in Deleting Use K / L to select Delete AllHiding Chapters Picture for thumbnail will be set Setting Pictures for ThumbnailsPress Return to exit You can divide one title into 2 new titles Dividing a TitlePutting Name on Disc Setting or Releasing Disc Protect You can erase all titles on a disc Erasing DiscCompatible, then press OK Making Edits CompatibleContents List of SettingsONAPR-OCT OFF List of SettingsPlayback SetupsParental Lock Default OFF SetupsPlayback cont’d YesAudio Language Default Original Disc Menu Language Default EnglishSubtitle Language Default OFF Angle Icon Default onFor 4 refer to pages DisplayRefer to 1 to 5 on page 87 and set the selected item Screen Saver Default 10 minutes OSD Language Default EnglishFL Dimmer Default Bright Display cont’dTV Aspect Default 43 Letter Box Progressive Scan Default OFFVideo Refer to 1 to 2 on this page and setReset the setting to default Reset AllRecording mode Select the recording mode using REC ModeVCR Functions To resume playbackPress REC I to begin the one-touch timer recording One-touch Timer Recording OTRYou cannot pause the one-touch timer recording VCR FunctionsOther Operations Symptom Remedy TroubleshootingOPEN/CLOSE a to take out the disc. The disc canceled during TroubleshootingRepairing process MAY not work Press OPEN/CLOSE aDVD mode only VCR mode Frequently Asked QuestionsREC 3 496 EN Language Code Language CodeGlossary General SpecificationsRecording TunerDiscos Reproducibles EspañolCódigos de Región Disco GrabableVHF / UHF EspañolPresione OK para activar Ajste Manual de Reloj Presione STANDBY-ON yPresione DVD Para seleccionar un modo deReproducción Inserte un disco Grabación con Temporizador1VMN23648A Customer ServiceTel
Top Page Image Contents